An eoi
Close mate moved back to Aus, he has a pretty mental r32. built rb30det. Hks cams, gt35 turbo, twin plate clutch. 2 way lsd, coilovers, drift knuckles etc. Too much to list
Car is quality built with nothing other than brand name parts.
It was converted from LHD one apon a time, so Dubai rego will be difficult but currently registered in abu dhabi and can renew easy.
Car is currently set up for drift and should pull a 10 sec quarter easy.
500rwhp r32 AD rego only
Hi mate I have just purchased one and wanted to know where you got the tuning done from - the only recommendation I have in Dubai is Deutsche Technik Service Centre - www.dtservicecentre.com - have you heard of these guys? are they any good?
Thanks - ended up taking it to DT they have worked on a R32 and are doing the following on mine:
HGP R35 Garrett Ball Bearing based hybrid turbo
Custom compressor housing
Integrated recirculation valve
Custom exhaust housing with integrated wastegate
Flowbenched Cast exhaust manifold with external Oxygen sensors
Short Runner Cast Aluminum Intake Manifold
Side Mount Intercooler(s) with velocity air shrouding
Stainless Steel Exhaust Manifold Heatshield
Flow Optimized cast downpipe feed
2 x 70mm downpipe with integrated flexjoint featuring interlocked liner hose for better flow
Custom wrapped Silicone piping with stainless steel clamps
High flow fuel injectors
Head spacer plate to lower compression to 8.5:1
Braided Stainless Steel Oil Feed Line
Oil Return lines
Water inlet and return lines
Performance ECU upgrade
High Flow Fuel Pump
High Flow Catalysts
Race Grade Connecting Rod Bearings
High Flow Mass Air Flow Sensor
Full HGP 3 inch exhaust system
HGP R35 Garrett Ball Bearing based hybrid turbo
Custom compressor housing
Integrated recirculation valve
Custom exhaust housing with integrated wastegate
Flowbenched Cast exhaust manifold with external Oxygen sensors
Short Runner Cast Aluminum Intake Manifold
Side Mount Intercooler(s) with velocity air shrouding
Stainless Steel Exhaust Manifold Heatshield
Flow Optimized cast downpipe feed
2 x 70mm downpipe with integrated flexjoint featuring interlocked liner hose for better flow
Custom wrapped Silicone piping with stainless steel clamps
High flow fuel injectors
Head spacer plate to lower compression to 8.5:1
Braided Stainless Steel Oil Feed Line
Oil Return lines
Water inlet and return lines
Performance ECU upgrade
High Flow Fuel Pump
High Flow Catalysts
Race Grade Connecting Rod Bearings
High Flow Mass Air Flow Sensor
Full HGP 3 inch exhaust system