AMS built 800 HP 2004 EVO VIII -Sleeper!

[AMS Performance]

Martin Musial, the owner of AMS Performance is selling his personal EVO VIII. Over the years this car has been our test mule on which we've developed hundreds of parts for the EVO VIII-IX platform. Currently the car is equipped with a whole slew of our products including our 2.0L drag motor, CNC head, turbo kit and bunch of other goodies total result of which is very reliable 800 HP. The car also underwent a diet which include our Carbon fiber roof, CF doors, trunk and a hood all of which were panted to match the factory color making the evo a bit of a sleeper.

Here are a few quick snaps of the car:

























Recently Martin was invited to compete in the 2009 Castrol Syntec Top Car challenge competition where him in and the car competed against 6 other top tuners in the US.




Here is a full mod list of the car in its current state:

Engine

• AMS CNC Ported Head with +1mm sized intake and exhaust valves
• AMS 2.0L race engine with 9.0:1 compression
• Tomei 280 camshafts
• AMS VSR Intake manifold
• Mil Spec 65mm throttle body
• AMS Upper Intercooler Pipe with Tial BOV
• AMS Race Front Mount Intercooler
• AMS GT35R (with 62mm billet compressor wheel) Turbo Kit with custom .82 A/R V-band discharge turbine housing
• Deatschwerks 1600cc/min injectors
• AMS Surge Tank with 2 walbro 255lph pumps (good for 900whp)
• AMS Fuel Pressure Regulator Kit
• AMS 3" exhaust

Electronics/Gauges

• AEM EMS
• Electronic Boost Control through AEM EMS with high/low boost switch
• AEM EUGO Gauge
• AEM Oil Pressure Gauge
• Autometer Boost Pressure Gauge

Drivetrain/suspension

• Tilton triple disc carbon-carbon push style clutch (good for 850 ft-lbs of torque) almost brand new!
• Shep built transmission
• Carbonetics Carbon 1.5 way rear LSD
• EVO RS front LSD
• Drive shaft shop 2 piece AL lightweight driveshaft
• JIC FLT-TAR coil-over suspension with custom spec'd springs (600lbs/in Front and 800lbs/in Rear)
• Cusco rear sway bar
• Adjustable Sway bar endlinks front and rear
• Whiteline Roll Center Adjuster Kit (front)
• Whiteline bump steer correction Kit (front)
• Various suspension bushings

Body/Interior

• Seibon Carbon doors (front and rear) painted to match body and work like stock (windows roll up and down in front) & power door locks work.
• Fiber Images lightweight hood & Trunk
• AMS Carbon Fiber Roof
• Vortex Generator
• AMS Roll Bar
• 5 pt harness (drivers side)

Wheels/Tires/Brakes

• Enkei 18x9.5 front and rears (front +38mm offset, rear +15mm offset)
• Michelin 265/18 Pilot Sport Cups (R-compound) with one track day of use
• PFC Z-rates pads (new)

For more information including videos of the car in action please visit the Ebay auction here:
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0480654489

The listed buy it now price in the Ebay auction is set at $35,000 USD, please feel free to contact me with any questions about the car, shipping costs to UAE and offers by e-mail to rich(at)amsperformance.com

Thank you

Sincerely

Rich


Cheers

[Matt]

that is fu ck ing sick.... i love how clean you've managed to keep it.... AND TALK ABOUT CHEAP!!! if i had the cash.... oh and good luck

[Ozimandius]

They've taken a written-off/salvaged vehicle as the base, hence the low price. Check out the ebay auction for details.

[Matt]

well like he said in the auction that the chassis if fine, had it all re-certified ie just like a normal car

[stone-head]

price is unbeatable
I wonder how some owners of some evos with just a filter & exhaust are asking
for 100k plus
this one is built by professionals , I would have bought it without any second thought ,
good luck AMS

[docaam]

sick car and sick price....if i would have known about this just a month before would have bought it ... i think i even sent you an offer for your EVO X ...anyways good luck with the sale

[AMS Performance]

Thank you for the positive comments folks!
3 days left!

[ROJ]

Good luck, thats a wonderful and clean project you got..