Super hot & rare JDM rims for sale!!!
Time to clean out the garage a bit!!! If you're looking for some super sexy rims for your Honda/E30 BMW or old school Toyota, here you go!! You will not see these rims anywhere else in the UAE. I'm a wheel fetishist and proud of it!
Only reason I'm selling these is that I've got some new 14 inch rims coming so I don't need these 15 inch beauties lying around anymore.
Drag DR-20s
Size: 4x100, 15x7, +10 offset, 73mm centre bore
Tires: Michelin Pilot Exalto tires in 195/50/15 (barely worn - plenty of life left!)
These rims are replicas of Work Equip 03s, in perfect or near-perfect condition. Not bent, no cosmetic damage at all. These rims are *not* damaged per say - never curbed, scraped, crashed etc. Any imperfections are just a result of normal wear and tear.
With the 4x100 bolt pattern they'll fit Miatas as well as Hondas, BMW E30s, some Toyotas etc. No need for spacers etc. but you may want to get hub centric rings for perfect fitment on your car for perfect fitment - google is your friend!!!
Asking AED 2000 for rims + tires together (will not separate rims and tires - they come together!)
Genuine JDM SSR MK2s!!!
Size: 4x100, 15x7, +20 offset, 68.1mm centre bore
Tires: Bridgestone RE-11s in 195/50/15 (barely worn - plenty of life left and these are super sticky - as sticky as you can get in a street tire and you won't find these for sale in the UAE!!)
These rims are the real deal - *genuine* JDM SSR MK2s - super rare! Cosmetically these rims are in near-perfect condition - there's a tiny, barely visible scratch on one of the lips that came from the guy I bought these from. Not visible to the naked eye when looking at the car.
Three of these rims are *slightly* bent - at least they're off by literally 2-3mm or so as checked by me on a balancing machine (although they do balance perfectly). Normal people won't notice but I'm very anal/OCD that way (plus my car weighs only 800kgs or so) and I don't believe in surprises. Easily repaired to 100% condition by Polimar, Al Mansoor etc. if you feel like it.
These rims are *not* damaged per say - never curbed, scraped, crashed etc. Any imperfections are just a result of normal wear and tear.
Also note that these are ''0-disc" rims - meaning that the rear face of the rims are pretty much flat. I can include 5mm or 10mm spacers for 54.1 hubs at no extra charge but you may also need ARP extended studs - I encourage you to do the research to ensure proper fitment on your own car! Google is your friend
These things are super expensive to buy new (about $500 US each and up per rim brand new!!!) and very hard to find at all - even if you do feel like spending a bit extra straightening them out to 100% perfection you're still be getting an *awesome* deal! You can check here for details: http://www.ssr-wheels.com/wheels/mk2.asp
With the 4x100 bolt pattern these will fit Miatas as well as Hondas, BMW E30s, some Toyotas (AE86) etc.
Asking AED 3000 obo for rims + tires together (again, won't separate rims and tires).
Since I'm not on here much, please SMS me at 0559351296 for inquiries, although I'll try to keep an eye on this thread! Make me an offer, but no crazy lowballers please!
Only reason I'm selling these is that I've got some new 14 inch rims coming so I don't need these 15 inch beauties lying around anymore.
Drag DR-20s
Size: 4x100, 15x7, +10 offset, 73mm centre bore
Tires: Michelin Pilot Exalto tires in 195/50/15 (barely worn - plenty of life left!)
These rims are replicas of Work Equip 03s, in perfect or near-perfect condition. Not bent, no cosmetic damage at all. These rims are *not* damaged per say - never curbed, scraped, crashed etc. Any imperfections are just a result of normal wear and tear.
With the 4x100 bolt pattern they'll fit Miatas as well as Hondas, BMW E30s, some Toyotas etc. No need for spacers etc. but you may want to get hub centric rings for perfect fitment on your car for perfect fitment - google is your friend!!!
Asking AED 2000 for rims + tires together (will not separate rims and tires - they come together!)
Genuine JDM SSR MK2s!!!
Size: 4x100, 15x7, +20 offset, 68.1mm centre bore
Tires: Bridgestone RE-11s in 195/50/15 (barely worn - plenty of life left and these are super sticky - as sticky as you can get in a street tire and you won't find these for sale in the UAE!!)
These rims are the real deal - *genuine* JDM SSR MK2s - super rare! Cosmetically these rims are in near-perfect condition - there's a tiny, barely visible scratch on one of the lips that came from the guy I bought these from. Not visible to the naked eye when looking at the car.
Three of these rims are *slightly* bent - at least they're off by literally 2-3mm or so as checked by me on a balancing machine (although they do balance perfectly). Normal people won't notice but I'm very anal/OCD that way (plus my car weighs only 800kgs or so) and I don't believe in surprises. Easily repaired to 100% condition by Polimar, Al Mansoor etc. if you feel like it.
These rims are *not* damaged per say - never curbed, scraped, crashed etc. Any imperfections are just a result of normal wear and tear.
Also note that these are ''0-disc" rims - meaning that the rear face of the rims are pretty much flat. I can include 5mm or 10mm spacers for 54.1 hubs at no extra charge but you may also need ARP extended studs - I encourage you to do the research to ensure proper fitment on your own car! Google is your friend
These things are super expensive to buy new (about $500 US each and up per rim brand new!!!) and very hard to find at all - even if you do feel like spending a bit extra straightening them out to 100% perfection you're still be getting an *awesome* deal! You can check here for details: http://www.ssr-wheels.com/wheels/mk2.asp
With the 4x100 bolt pattern these will fit Miatas as well as Hondas, BMW E30s, some Toyotas (AE86) etc.
Asking AED 3000 obo for rims + tires together (again, won't separate rims and tires).
Since I'm not on here much, please SMS me at 0559351296 for inquiries, although I'll try to keep an eye on this thread! Make me an offer, but no crazy lowballers please!
- Ozimandius
- UB Super Member
- Posts:3804
- Joined:09 Aug 2008, 5:13 pm
- Vehicle:Mazda Miata MX-5 NA
Hey there!
Good luck with the sale!
Good luck with the sale!
Thanks for the upz!
Just check your fitment as much as possible first - and don't be afraid to roll fenders if you gotta!
Just check your fitment as much as possible first - and don't be afraid to roll fenders if you gotta!
- CUSTOM_RIDE
- UB Dedicated Member
- Posts:212
- Joined:11 Mar 2007, 4:55 am
lovely rimz. ...had always been lookin 4 them....but my badluck u sellin it now n i m runnin out of cash... any how bro best of luck 4 sale....n
Thanks for the props, spread the word!
You won't even get Rotas here for the same money!
You won't even get Rotas here for the same money!
- Ozimandius
- UB Super Member
- Posts:3804
- Joined:09 Aug 2008, 5:13 pm
- Vehicle:Mazda Miata MX-5 NA
These are exactly what you need to get the proper Hella flush/baller look on your VW, BMW, etc.
Here are some rolling shots to give you an idea:
Here are some rolling shots to give you an idea:
-
- UB Junior Member
- Posts:1
- Joined:10 Dec 2010, 7:02 pm
I am interested in buying your SSR MK2 rims. I called the number you posted but he guy who answered doesn't know how to speak english. PM me your number and I'll call you right away, I'm a sure buyer.