350z parts for sale
hi guys..
its time for a lil partout ( dont ask why .... u will know later )
1) Tomie set ( Headers /Test pipes )
Info: Sharp accelerator response, engine feel of pressure, and fascinating sound is the design criteria behind the Extreme Headers for 350Z.
Tomei Extreme Exhaust Manifold for VQ35DE has realized more special taste to NA engine which cannot be expressed by the performance curve, naturally improved in power performance. When these all unite, get the big change which cannot imagine from stock. Once you buy this header you will feel the wonderful NA engine feeling produced by precise research and development of Tomei.
Key Features:
-Design that suppressed exhaust resistance
-Main pipe 42.7mm, Exit pipe 60mm
-1.5mm thin pipe
-Lightweight High precision flanges
-The design in consideration of workability
-Bolt, Gaskets are included
-Heat warps is included Fit in high Temperatures
Stock Weight: 44.5 lbs
Tomei Weight: 21 lbs
http://www.500whp.com/catalog/product_i ... ts_id=2912
New = 6500 dhs ( headers = 4500dhs / test pipes = 2000dhs ) bought from intraco shj
Selling = 2800 dhs ( headers 2000 / test pipes = 800 )
2) fijitsubo y-pipe:
info: Fujitsubo front-pipe replaces the factory y-pipe after the main cats. This pipe will relieve restrictive back pressure and is dynod proven for +5 rear wheel horsepower over the stock y-pipe. This high quality stainless pipe also weighs significantly less the stock piece (stock = 7.3kg, Fujitsubo = 5.8kg)
http://www.evasivemotorsports.com/merch ... JITSUBO-ES
new = 529$ =1941 dhs without shipping
selling = 1000 Dhs ( have some scratches . no leaks )
3) Injen Cold air intake with K&N new air filter.
info: "INJEN SP COLD AIR INTAKE, POLISHED -- This Fully Tuned Air Intake System Features Patent Pending Mega Ram Technology That Regulates The Volume And Velocity Of The Charged Airflow By Using Variable And Calibrated Diameter Aluminum Tubes, It Boosts Optimal Performance Gains While Maintaining The Factory Air/Fuel Mixture Safe, This Air Intake System Is Fine-Tuned For Specific Applications, Includes CNC Machined Brackets For A Precise Fit, C.A.R.B. Certified"
New = 308$ = 1130 dhs without shipping.
Selling = 600 dhs.
Pm me or call me on 0505372672 for any enquires
prices are firm and reasonable i believe.
No low balling guys.
its time for a lil partout ( dont ask why .... u will know later )
1) Tomie set ( Headers /Test pipes )
Info: Sharp accelerator response, engine feel of pressure, and fascinating sound is the design criteria behind the Extreme Headers for 350Z.
Tomei Extreme Exhaust Manifold for VQ35DE has realized more special taste to NA engine which cannot be expressed by the performance curve, naturally improved in power performance. When these all unite, get the big change which cannot imagine from stock. Once you buy this header you will feel the wonderful NA engine feeling produced by precise research and development of Tomei.
Key Features:
-Design that suppressed exhaust resistance
-Main pipe 42.7mm, Exit pipe 60mm
-1.5mm thin pipe
-Lightweight High precision flanges
-The design in consideration of workability
-Bolt, Gaskets are included
-Heat warps is included Fit in high Temperatures
Stock Weight: 44.5 lbs
Tomei Weight: 21 lbs
http://www.500whp.com/catalog/product_i ... ts_id=2912
New = 6500 dhs ( headers = 4500dhs / test pipes = 2000dhs ) bought from intraco shj
Selling = 2800 dhs ( headers 2000 / test pipes = 800 )
2) fijitsubo y-pipe:
info: Fujitsubo front-pipe replaces the factory y-pipe after the main cats. This pipe will relieve restrictive back pressure and is dynod proven for +5 rear wheel horsepower over the stock y-pipe. This high quality stainless pipe also weighs significantly less the stock piece (stock = 7.3kg, Fujitsubo = 5.8kg)
http://www.evasivemotorsports.com/merch ... JITSUBO-ES
new = 529$ =1941 dhs without shipping
selling = 1000 Dhs ( have some scratches . no leaks )
3) Injen Cold air intake with K&N new air filter.
info: "INJEN SP COLD AIR INTAKE, POLISHED -- This Fully Tuned Air Intake System Features Patent Pending Mega Ram Technology That Regulates The Volume And Velocity Of The Charged Airflow By Using Variable And Calibrated Diameter Aluminum Tubes, It Boosts Optimal Performance Gains While Maintaining The Factory Air/Fuel Mixture Safe, This Air Intake System Is Fine-Tuned For Specific Applications, Includes CNC Machined Brackets For A Precise Fit, C.A.R.B. Certified"
New = 308$ = 1130 dhs without shipping.
Selling = 600 dhs.
Pm me or call me on 0505372672 for any enquires
prices are firm and reasonable i believe.
No low balling guys.
a7med wrote:will the injen fit g35? and how many kilometers were they used?
i dont think it will fit.. as the only difference in the Z and G is the intake piping.. but u can check i am not 100% sure
i dont know if u the same person who called me today.
Z tube is differnt.a7med wrote:yeah i called you ... you mean the z tube? for all i know z tube is used on g35 as well, i'll check until you uninstall it ... otherwise i am interested in the headers and y pipe ... how many KMs have you had them on?
Enjin is a cold air intake that goes down to teh bumer where it can suck more clod air . thats why i told u it might not fit.. but sure we can check it after i remove the stuff.
headers used for around around 10000KM.
Y-pipe around 15000km
the car is not a daily drive.. its only for weekends.
-
- UB Junior Member
- Posts:20
- Joined:10 Aug 2008, 11:31 am
HI
IF THE AIR FILTER FITTED ON MY CAR I WILL TAKE IT
WHERE CAN WE MEET ???
MY NO. 0502050207
IF THE AIR FILTER FITTED ON MY CAR I WILL TAKE IT
WHERE CAN WE MEET ???
MY NO. 0502050207
sold chrysler, i am taking it, and the headers too (need to see headers first) ... but you might want to check if the Y-pipe fits your car thoughchrysler300 wrote:HI
IF THE AIR FILTER FITTED ON MY CAR I WILL TAKE IT
WHERE CAN WE MEET ???
MY NO. 0502050207
... on a second thought, i might need the pipe too.
-
- UB Junior Member
- Posts:20
- Joined:10 Aug 2008, 11:31 am
OK OK A7MED MABROOK
I HOPE U LIKE IT ALSO I CHANGE MY MIND MY CAR ALREADY IN SHJ POLICE FOR 30 DAYS
BECAUSE ALREADY I FIT ON IT HEADERS AND CATBACK
A7MED LET ME HEAR UR CAR AFTER GOOD LUCK BRO.
I HOPE U LIKE IT ALSO I CHANGE MY MIND MY CAR ALREADY IN SHJ POLICE FOR 30 DAYS
BECAUSE ALREADY I FIT ON IT HEADERS AND CATBACK
A7MED LET ME HEAR UR CAR AFTER GOOD LUCK BRO.
-
- UB Junior Member
- Posts:20
- Joined:10 Aug 2008, 11:31 am
AL7AMDULILAH I TAKE IT OUT MY CAR ^_^
IGET WASTA FROM MY FRIEND
I HAVE THE YELLOW CHRYSLER ITHINK U KNOW IT^_^
I HAVE HEADERS JBA AND MAGNA FLOW CATBACK
BUT I THINK STILL NOT NOISE ENOUGH>>>>
AND BOTH OF GREDDY AND HKS BEST BRAND IN EXHAUST TAKE CARE OF UR SELF BRO.
IGET WASTA FROM MY FRIEND
I HAVE THE YELLOW CHRYSLER ITHINK U KNOW IT^_^
I HAVE HEADERS JBA AND MAGNA FLOW CATBACK
BUT I THINK STILL NOT NOISE ENOUGH>>>>
AND BOTH OF GREDDY AND HKS BEST BRAND IN EXHAUST TAKE CARE OF UR SELF BRO.
HKS FTMW... looks sexy and sounds mean ..a7med wrote:oh shit! reckless driving? what car you got?
iam getting HKS exhaust as well ... confused between hks and greddy at the moment.
greedy isnt much for the Z.. this is my openion and sure others would have different openions.
a7med. regarding teh headers. i will remove them tomorrow and will check them for any leaks. and will let you know.
see ya .
btw. i liked the pics of the interior u have on that car. amazing job
Parts are out of the car below is the list again with less details
headers i will be using .. i cant sell it
available parts:
1) Fijitsubo Y-pipe
2) Injen Air inatke system ( with K&N filter 2 months old only, bought it for 250dhs )
3) UR crank Pulley with 2 new Gates belt ( used for 2 months , changed teh belt when i changed teh filter )
4) Tomie Test pipes with heatrap.
Sale is pending to A7med. if the sale fall throught i will let the intereseted ppl know
fair for everyone first come first serve
headers i will be using .. i cant sell it
available parts:
1) Fijitsubo Y-pipe
2) Injen Air inatke system ( with K&N filter 2 months old only, bought it for 250dhs )
3) UR crank Pulley with 2 new Gates belt ( used for 2 months , changed teh belt when i changed teh filter )
4) Tomie Test pipes with heatrap.
Sale is pending to A7med. if the sale fall throught i will let the intereseted ppl know
fair for everyone first come first serve