Soarer is back.............. So soooooooon :) :)
- SoarerTO4R
- UB Addicted Member
- Posts:148
- Joined:26 Jul 2005, 3:42 am
- Vehicle:1996 Lexus SC-300
Hey guysss ,as most of you might dont know , I've sold my previous engine ( with the To4R and ..etc , So 1 month ago I started my new project , and just yesterday I've just finished assembling my engine finally ! , it took us 22 days of hard working ( getting the parts , testing them , & chroming the parts ) , so have a look @ the engine & tell me How do u feeeeeeeel ...
I've also done some changes to the car exterior , ,,, check it out toooooo
Engine Setup is like the following :
Engine : 2JZ-GTE .................... daaah !!!
Tranny : 6 spd Supra Transs
Turbine : Greddy T88 38d GK
Engine Head : Custome polished & ported in Thailand With full ARP kit - Spokters & studs ..etc -
Pistons : Ross
Connecting Rod : Ross !!
Krank : custome made & imported from Australia
Intake : Stock
Fuell Injecters : HKS 860 cc
Fuell Rail : Custome ported Stock Rail ( Imported from Australia )
Cams : Jun cams - 272 for the Intake side & 280 for the Exuast Side -
Cams Polys : AEM full adjust Cam polys
Brand new Water pumb with TRD thermostat ...
ECU : Minesssssssssssss :):):)
I hope i didnt forget anything ,, anyways check it out
1st of all , here is my engine bay after the new dress up
in this pic you can see the engine without the turbo & the cams polys are visiable ...
Now , my engine without the intake or the exuast ( headers ) .
Here is the whole engine done & ready to be Inserted to my Engine bayyyy
And here is my new Top Secret wing & the new front pumber
thats for now , I have many other pics & I'll post them later on inshallah ....
the car will be out on the streets hopefully 20 ~ 22 days from now , as am doing this new paint job add to that the tunning so a couple of weeks more & the dragon will be unleaaaaaaaaaaaaaaashed :):) just kiddin
I've also done some changes to the car exterior , ,,, check it out toooooo
Engine Setup is like the following :
Engine : 2JZ-GTE .................... daaah !!!
Tranny : 6 spd Supra Transs
Turbine : Greddy T88 38d GK
Engine Head : Custome polished & ported in Thailand With full ARP kit - Spokters & studs ..etc -
Pistons : Ross
Connecting Rod : Ross !!
Krank : custome made & imported from Australia
Intake : Stock
Fuell Injecters : HKS 860 cc
Fuell Rail : Custome ported Stock Rail ( Imported from Australia )
Cams : Jun cams - 272 for the Intake side & 280 for the Exuast Side -
Cams Polys : AEM full adjust Cam polys
Brand new Water pumb with TRD thermostat ...
ECU : Minesssssssssssss :):):)
I hope i didnt forget anything ,, anyways check it out
1st of all , here is my engine bay after the new dress up
in this pic you can see the engine without the turbo & the cams polys are visiable ...
Now , my engine without the intake or the exuast ( headers ) .
Here is the whole engine done & ready to be Inserted to my Engine bayyyy
And here is my new Top Secret wing & the new front pumber
thats for now , I have many other pics & I'll post them later on inshallah ....
the car will be out on the streets hopefully 20 ~ 22 days from now , as am doing this new paint job add to that the tunning so a couple of weeks more & the dragon will be unleaaaaaaaaaaaaaaashed :):) just kiddin
good work ghasan....keep it up...........and waitin to seee ur car to smoke others........ ........
- SoarerTO4R
- UB Addicted Member
- Posts:148
- Joined:26 Jul 2005, 3:42 am
- Vehicle:1996 Lexus SC-300
Thanx everybody .....
pics willl be coming up , and just to let you know , I have'nt install the engine in my car yet 'cause I still got to paint the car , but its just a matter of days , hopefully I'll be getting around 700 hp in 1.5 ~ 1.8 bar of boost , anyway I've already booked an appoinment with mr. Mark from 1000 dunes garaj for the dyno test on the 1st of july , and my goal is 2.4 bar limits.... :):):)
......... Inshallah kheeeeeer :) !!
pics willl be coming up , and just to let you know , I have'nt install the engine in my car yet 'cause I still got to paint the car , but its just a matter of days , hopefully I'll be getting around 700 hp in 1.5 ~ 1.8 bar of boost , anyway I've already booked an appoinment with mr. Mark from 1000 dunes garaj for the dyno test on the 1st of july , and my goal is 2.4 bar limits.... :):):)
......... Inshallah kheeeeeer :) !!
-
- UB Super Member
- Posts:4580
- Joined:11 Sep 2005, 1:41 pm
- Vehicle:Lexus IS300
- Location:Dubai, UAE
- Contact:
dunno how your tune is, and what you'll rpms will be.. but I guess with good cooling (dyno, perfect conditions), good tuning and high octane addjectives (c16 ) .. a 4 digit might not be that far away...SoarerTO4R wrote:hopefully I'll be getting around 700 hp in 1.5 ~ 1.8 bar of boost
-
- UB Junior Member
- Posts:40
- Joined:31 Jul 2005, 2:58 pm
- Location:Sharjah
- Contact:
same here i am not able to see the pics i .............
-
- UB Junior Member
- Posts:19
- Joined:16 Sep 2005, 7:20 pm
no pic at all could u check plzzz mate
thnx
thnx
- SoarerTO4R
- UB Addicted Member
- Posts:148
- Joined:26 Jul 2005, 3:42 am
- Vehicle:1996 Lexus SC-300
Soryy mates ,,
The pics are there but they are doin some kinda maintainance on the server ,,it will take a another 24 hours ...anyway ,,as soon as I get home I'll post them again ....!! :)
Sorrrrry
The pics are there but they are doin some kinda maintainance on the server ,,it will take a another 24 hours ...anyway ,,as soon as I get home I'll post them again ....!! :)
Sorrrrry