My 2011 Nissan Tiida HB !

The area to post your car/bike pics and specs.
Post one car/bike per Topic.

Moderator: Accord98

User avatar
hk20
UB Advanced Member
Posts: 1208
Joined: 20 Jan 2007, 10:16 am
Vehicle: 2011 Nissan Tiida HB - JDM Project
Location: Dubai

Post by hk20 » 12 Nov 2011, 3:09 pm

So its been 6 months since i bought my car and haven't posted pics until now..

so here goes...

Bought it in May...

Its a 2011 Nissan Tiida HatchBack

1.8 litre i4 with MR18 Engine (good for the kicks)

I was looking for a RED one but sadly they dint have it in stock and i was in a hurry to get it then..so i got myself a WHITE Tiida HB.

Mid-Option with Cruise and Alloys.

Car has so far done 9k kms..with few parking lot scratches from ^&*(% !! :arrow:

Car is stock as of now, just added 30% Tint and Leather Seat Cover in Beige.

Lots of plans for it, just taking my time to do them.

Will keep you all posted. :D

For Now..

Image

Image

Image

Image

Image

Image

Image

Image

These are the pics that i have as of now of my car without tint or anything as such. Never took pics after tinting.

My Future Plans:

Tein Basic Damper Coilovers

Image

OEM Spoiler

Image

OR

Custom Spoiler

Image

Custom Mesh Grill (My Own Design made in Paint :razz: )

Image

Projector HeadLights

Image

Nismo CAI

Image

or STILLEN CAI

Nismo Axleback Exhaust

Image

or Tanabe Cat-Back Exhaust

Image

RIMS i am planning to go with Gold 17inch Rims Like these...

Image

Image

Image

Image

Image

Image

Image

Image

I found a 17inch replica of the Work Vs-xx in Al Khubair a few months back, though he claimed it to be real ones they were fakes..

Some pics when i just tried them out..

Image

Image

Thats all for now.

Cheers :D !
Last edited by hk20 on 13 Apr 2012, 10:44 pm, edited 1 time in total.

User avatar
Alpha
Adminstrator
Posts: 6251
Joined: 17 Apr 2006, 6:36 pm
Vehicle: RNN14 + JZZ31 + CT9A
Location: Dubai
Contact:

Post by Alpha » 12 Nov 2011, 3:58 pm

Image
Image
Image
Image

User avatar
hk20
UB Advanced Member
Posts: 1208
Joined: 20 Jan 2007, 10:16 am
Vehicle: 2011 Nissan Tiida HB - JDM Project
Location: Dubai

Post by hk20 » 12 Nov 2011, 4:06 pm

I have seen that Tiida, he stays in riqqa near my friend's building. Its neatly Done.

Is the body kit from C&C ? If yes, can u PM me the quote for the kit with installation ?

User avatar
hk20
UB Advanced Member
Posts: 1208
Joined: 20 Jan 2007, 10:16 am
Vehicle: 2011 Nissan Tiida HB - JDM Project
Location: Dubai

Post by hk20 » 12 Nov 2011, 4:07 pm

If you guys know of a place where i can get to make Custom Grill and Spoiler, do let me know.

User avatar
TNT
UB Super Member
Posts: 4194
Joined: 12 Jun 2007, 1:25 pm
Vehicle: Jeep Wrangler
Location: Dubai, UAE

Post by TNT » 12 Nov 2011, 6:04 pm

Will look baller after all those mods.

User avatar
wek-236
UB Advanced Member
Posts: 1249
Joined: 21 Feb 2006, 2:46 pm
Vehicle: s2k and Mazda 3
Location: Dubai/Philippines

Post by wek-236 » 16 Nov 2011, 4:14 pm

VS-XX replicas are not even replicas.. LOL..

see the design... its way lot different

User avatar
hk20
UB Advanced Member
Posts: 1208
Joined: 20 Jan 2007, 10:16 am
Vehicle: 2011 Nissan Tiida HB - JDM Project
Location: Dubai

Post by hk20 » 16 Nov 2011, 5:59 pm

Well the shop keep claimed it to be Work Racing Vs-xx orginal rims.

djbill
UB Addicted Member
Posts: 115
Joined: 28 Jun 2008, 3:05 pm

Post by djbill » 17 Nov 2011, 1:51 am

tida is done from Xtreme styling which is in Ramool...

User avatar
hk20
UB Advanced Member
Posts: 1208
Joined: 20 Jan 2007, 10:16 am
Vehicle: 2011 Nissan Tiida HB - JDM Project
Location: Dubai

Post by hk20 » 17 Nov 2011, 7:48 am

^ Any directions ?

real_ashwin
UB Senior Member
Posts: 565
Joined: 07 Dec 2009, 12:43 am
Vehicle: Nissan Altima 2008 SE
Location: Ghussais, Dubai

Post by real_ashwin » 17 Nov 2011, 11:17 am

1) stock roof spoler looks better than the custom
2) i suggest you go for rota instead of cheap replicas
3) coilovers would be more expensive why not just get some lower springs instead?
4) delta plus in ghussais can do the custom projector lights
5) everything else looks good :)

djbill
UB Addicted Member
Posts: 115
Joined: 28 Jun 2008, 3:05 pm

Post by djbill » 17 Nov 2011, 2:01 pm

AL MONSEEF GARAGE (XTREME STYLING) in AL RAMOOL.

User avatar
hk20
UB Advanced Member
Posts: 1208
Joined: 20 Jan 2007, 10:16 am
Vehicle: 2011 Nissan Tiida HB - JDM Project
Location: Dubai

Post by hk20 » 17 Nov 2011, 2:16 pm

@real_ashwin - Thanks for the suggestion bro :)

About the rims i am NOT going for replicas, i am looking at Rotas or Used Genuine Rims from Al Khubair or anywhere i can find in GOLD 17inch 4x114.3 :)

Coilovers i agree are expensive but how much does a lowering spring cost Brand new or used and wont i have a bumpy unstable ride after the Lowering springs ? The Tein coilover which i am looking to get costs about 800$.

The projector lights i checked with Deltaplus he told me 850.

I need to make my Custom Mesh Grill, do you know of any places where they can custom make grill ?

PS. a few months back i spotted your car in AA when you had come for service i guess, i did take some pics, will post it in your thread :) Your Car Looks Clean and Better in Person!

@djbill - Thanks bro, but can you give me direction to go there as i am not familiar with Al ramool roads or area. Do they make Custom Grill over there ?

User avatar
kruel_dude
UB Addicted Member
Posts: 117
Joined: 27 Feb 2008, 9:37 am
Vehicle: Mitsubishi Lancer GT
Location: Sharjah

Post by kruel_dude » 17 Nov 2011, 3:18 pm

Al Ramool, Behind Trading Enterprise, Extreme Auto Styling (Al Monsef Garage) 050-3849491 Ahmed - All Kind of custom body works, air brush, 3d airbrush etc.
http://www.facebook.com/extremeautostyling
check on above link, some of great jobs done by them.

real_ashwin
UB Senior Member
Posts: 565
Joined: 07 Dec 2009, 12:43 am
Vehicle: Nissan Altima 2008 SE
Location: Ghussais, Dubai

Post by real_ashwin » 17 Nov 2011, 3:48 pm

hk20 wrote:@real_ashwin - Thanks for the suggestion bro :)

About the rims i am NOT going for replicas, i am looking at Rotas or Used Genuine Rims from Al Khubair or anywhere i can find in GOLD 17inch 4x114.3 :)

Coilovers i agree are expensive but how much does a lowering spring cost Brand new or used and wont i have a bumpy unstable ride after the Lowering springs ? The Tein coilover which i am looking to get costs about 800$.

The projector lights i checked with Deltaplus he told me 850.

I need to make my Custom Mesh Grill, do you know of any places where they can custom make grill ?

PS. a few months back i spotted your car in AA when you had come for service i guess, i did take some pics, will post it in your thread :) Your Car Looks Clean and Better in Person!

@djbill - Thanks bro, but can you give me direction to go there as i am not familiar with Al ramool roads or area. Do they make Custom Grill over there ?
Great Rotas are awesome you wont regret getting them.

Springs are around 200 USD for nissan tida(versa), majority of ppl have the tanbe springs
but "Megan Racing Lowering Springs" are supposed to be a more of a drop that tanabe. (found this off some versa forums)

You could always buy a mesh grill directly c-mod makes some cheap grills they have 1 grill for you
http://cmodgrilles.auctivacommerce.com/ ... 19595.aspx
If you need some1 to fabricate you could try a friend of mine Sherrin 04-3409096 @ Rover garage

850 for the projector headlights are a normal rate there with HID @ delta.

Have fun modding...

Im glad you liked my car. Next time if you see me just fell free to say hi :)
Last edited by real_ashwin on 17 Nov 2011, 9:02 pm, edited 1 time in total.

User avatar
Tribal
UB Senior Member
Posts: 415
Joined: 03 Aug 2010, 3:16 pm
Vehicle: G35
Location: Dubai

Post by Tribal » 17 Nov 2011, 7:00 pm

kruel_dude wrote:Al Ramool, Behind Trading Enterprise, Extreme Auto Styling (Al Monsef Garage) 050-3849491 Ahmed - All Kind of custom body works, air brush, 3d airbrush etc.
http://www.facebook.com/extremeautostyling
check on above link, some of great jobs done by them.
Don't mean to go off Topic but Does this workshop have Universal front lips or Side skirts?
Well, Tiida could use a Lip Kit aswell (Y) not so overdone like the black one, a more Simple one would be Great.



Post Reply
  • Similar Topics
    Replies
    Views
    Last post