My 2011 Nissan Tiida HB !
Moderator:Accord98
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
@CaL][CaB - I had lowered with a set of tein used ones from sharjah, and it was a horrible experience with cut springs and shit so i took it off. I'm looking for genuine non-cut stuff which will not be bumpy and squeaky. Hopefully, looking to find something.
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
@Mr.HacKeR - I know it badly needs a drop, but im kinda broke now and need to save up for suspension. Thinking of getting coilovers but genuine stuff only. Springs is cheap and lowers the height, but on the long run it will blow my stock shocks or i will have to get shocks too for the car.
About painting the middle of the grill, im not with that idea. I finalized on this color combo after a lot of testing on different color options but none of it was of my taste and this one looks the best out of the other options.
I have more pictures coming soon
About painting the middle of the grill, im not with that idea. I finalized on this color combo after a lot of testing on different color options but none of it was of my taste and this one looks the best out of the other options.
I have more pictures coming soon
-
- UB Senior Member
- Posts:565
- Joined:07 Dec 2009, 12:43 am
- Vehicle:Nissan Altima 2008 SE
- Location:Ghussais, Dubai
nice tida hatchbacks are so much fun to mod.
- k77ang3r
- UB Dedicated Member
- Posts:340
- Joined:25 Dec 2008, 9:36 am
- Vehicle:AE92 Toyota Corolla
- Location:Al-Qouz Res. area, Dubai, U.A.E.
By the way do you know this ???
"The MR16DDT is a 1.6 L (1618 cc) DIG-T (Direct Injection Gasoline Turbo-charged) engine, bore is 79.7 mm (3.14 in) and stroke is 81.1 mm (3.19 in). It was first introduced in the Nissan Juke small SUV in the autumn of 2010. Output is 188 hp (140 kW) and 177 lb·ft (240 N·m).
Some of the pertinent features of the MR16DDT are:
Sodium filled exhaust valves
Nano finished camshafts
Beehive valve springs
Twin variable valve timing control (CVTCS on intake and exhaust valves)
Turbo-charged and intercooled
Compression ratio of 9.5:1
Improved fuel efficiency and CO2 emissions
Light weight design and reduced frictions
Applications:
2011–present Nissan Juke
2013 Nissan Tiida (hatchback)
"The MR16DDT is a 1.6 L (1618 cc) DIG-T (Direct Injection Gasoline Turbo-charged) engine, bore is 79.7 mm (3.14 in) and stroke is 81.1 mm (3.19 in). It was first introduced in the Nissan Juke small SUV in the autumn of 2010. Output is 188 hp (140 kW) and 177 lb·ft (240 N·m).
Some of the pertinent features of the MR16DDT are:
Sodium filled exhaust valves
Nano finished camshafts
Beehive valve springs
Twin variable valve timing control (CVTCS on intake and exhaust valves)
Turbo-charged and intercooled
Compression ratio of 9.5:1
Improved fuel efficiency and CO2 emissions
Light weight design and reduced frictions
Applications:
2011–present Nissan Juke
2013 Nissan Tiida (hatchback)
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
So i revived the Tiida Project after a really long time & below are what i did:
Impul Rear Bumper Lip with Diffuser
Custom Side Skirts
Custom Front Lip
Bottom Mesh Grill on front Bumper
Complete Custom Interior in Red German Leather (Seats, Door Panels, Steering) & Soft Fabric (Roof, Carpets, trunk)
Dash Board half Black Paint job
All Plastic Panels in the interior changed to red
Metallic Gold Paint on All 4 Rims (Spokes only)
OEM Rear Hatch Spoiler
Exhaust Tip
Engine Valve cover in Red
All the above job was done from King of Customs in Ghusais, i must say he did an impressive job. Though the front lip & side skirts are not exactly what i wanted, it looks neat. The front lip is much lower than the rest of the body and i'm not liking it as much. I will probably change them later with CF Lip.
Next Mods in plan:
CF Front Lip
CF Side Skirt Extensions
Coilovers
White LED Interior Cabin Lights/ Plate lights
JDM Yellow Fog bulbs or White bulbs for the Fogs
Black House the Head Light with 6000K Xenon lights
CF Sticker on all Silver Panels
Red Neon Glow LED Strips on Dash Board
Stillen CAI
7" Double DIN Head Unit
4 Speakers
1 Amp + 10" Subwoofer
Let me know your Feedback on my project, Pictures in the next post!
Impul Rear Bumper Lip with Diffuser
Custom Side Skirts
Custom Front Lip
Bottom Mesh Grill on front Bumper
Complete Custom Interior in Red German Leather (Seats, Door Panels, Steering) & Soft Fabric (Roof, Carpets, trunk)
Dash Board half Black Paint job
All Plastic Panels in the interior changed to red
Metallic Gold Paint on All 4 Rims (Spokes only)
OEM Rear Hatch Spoiler
Exhaust Tip
Engine Valve cover in Red
All the above job was done from King of Customs in Ghusais, i must say he did an impressive job. Though the front lip & side skirts are not exactly what i wanted, it looks neat. The front lip is much lower than the rest of the body and i'm not liking it as much. I will probably change them later with CF Lip.
Next Mods in plan:
CF Front Lip
CF Side Skirt Extensions
Coilovers
White LED Interior Cabin Lights/ Plate lights
JDM Yellow Fog bulbs or White bulbs for the Fogs
Black House the Head Light with 6000K Xenon lights
CF Sticker on all Silver Panels
Red Neon Glow LED Strips on Dash Board
Stillen CAI
7" Double DIN Head Unit
4 Speakers
1 Amp + 10" Subwoofer
Let me know your Feedback on my project, Pictures in the next post!
-
- UB Junior Member
- Posts:3
- Joined:13 Jul 2014, 5:27 am
Man I really love the interior its amazing and love the bodykit i also have a tiida with 2.0 (MR20DE) engine upgrade since the 1.8 failed can you tell me where you did the interior and the bodykit thank you
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
I did it from King of Customs: https://www.facebook.com/kingofcustomsdxb in Ghusais. The interior is a brilliant job but not so happy with the body work. I'm planning on re-doing the body work somewhere else. Post up some pictures of your Tiida and where did you get a MR20DE ?
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
For body kits & other accessories for your tiida, visit Future Style Accessories aka UAEWheels: https://www.facebook.com/uaewheels, i just went there and they have some body kits for tiida.
- Ozimandius
- UB Super Member
- Posts:3804
- Joined:09 Aug 2008, 5:13 pm
- Vehicle:Mazda Miata MX-5 NA
I think I saw you in Dubai Silicon Oasis a few weeks ago, it was a Friday or a Saturday.
I also think I saw you in the petrol station in Umm Ramool (the one with Papa John's, Texas Chicken and Subway and the carwash).
I also think I saw you in the petrol station in Umm Ramool (the one with Papa John's, Texas Chicken and Subway and the carwash).