My 2011 Nissan Tiida HB !
Moderator:Accord98
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
So its been 6 months since i bought my car and haven't posted pics until now..
so here goes...
Bought it in May...
Its a 2011 Nissan Tiida HatchBack
1.8 litre i4 with MR18 Engine (good for the kicks)
I was looking for a RED one but sadly they dint have it in stock and i was in a hurry to get it then..so i got myself a WHITE Tiida HB.
Mid-Option with Cruise and Alloys.
Car has so far done 9k kms..with few parking lot scratches from ^&*(% !!
Car is stock as of now, just added 30% Tint and Leather Seat Cover in Beige.
Lots of plans for it, just taking my time to do them.
Will keep you all posted.
For Now..
These are the pics that i have as of now of my car without tint or anything as such. Never took pics after tinting.
My Future Plans:
Tein Basic Damper Coilovers
OEM Spoiler
OR
Custom Spoiler
Custom Mesh Grill (My Own Design made in Paint )
Projector HeadLights
Nismo CAI
or STILLEN CAI
Nismo Axleback Exhaust
or Tanabe Cat-Back Exhaust
RIMS i am planning to go with Gold 17inch Rims Like these...
I found a 17inch replica of the Work Vs-xx in Al Khubair a few months back, though he claimed it to be real ones they were fakes..
Some pics when i just tried them out..
Thats all for now.
Cheers !
so here goes...
Bought it in May...
Its a 2011 Nissan Tiida HatchBack
1.8 litre i4 with MR18 Engine (good for the kicks)
I was looking for a RED one but sadly they dint have it in stock and i was in a hurry to get it then..so i got myself a WHITE Tiida HB.
Mid-Option with Cruise and Alloys.
Car has so far done 9k kms..with few parking lot scratches from ^&*(% !!
Car is stock as of now, just added 30% Tint and Leather Seat Cover in Beige.
Lots of plans for it, just taking my time to do them.
Will keep you all posted.
For Now..
These are the pics that i have as of now of my car without tint or anything as such. Never took pics after tinting.
My Future Plans:
Tein Basic Damper Coilovers
OEM Spoiler
OR
Custom Spoiler
Custom Mesh Grill (My Own Design made in Paint )
Projector HeadLights
Nismo CAI
or STILLEN CAI
Nismo Axleback Exhaust
or Tanabe Cat-Back Exhaust
RIMS i am planning to go with Gold 17inch Rims Like these...
I found a 17inch replica of the Work Vs-xx in Al Khubair a few months back, though he claimed it to be real ones they were fakes..
Some pics when i just tried them out..
Thats all for now.
Cheers !
Last edited by hk20 on 13 Apr 2012, 10:44 pm, edited 1 time in total.
-
- UB Senior Member
- Posts:565
- Joined:07 Dec 2009, 12:43 am
- Vehicle:Nissan Altima 2008 SE
- Location:Ghussais, Dubai
1) stock roof spoler looks better than the custom
2) i suggest you go for rota instead of cheap replicas
3) coilovers would be more expensive why not just get some lower springs instead?
4) delta plus in ghussais can do the custom projector lights
5) everything else looks good
2) i suggest you go for rota instead of cheap replicas
3) coilovers would be more expensive why not just get some lower springs instead?
4) delta plus in ghussais can do the custom projector lights
5) everything else looks good
- hk20
- UB Advanced Member
- Posts:1208
- Joined:20 Jan 2007, 10:16 am
- Vehicle:2011 Nissan Tiida HB - JDM Project
- Location:Dubai
@real_ashwin - Thanks for the suggestion bro
About the rims i am NOT going for replicas, i am looking at Rotas or Used Genuine Rims from Al Khubair or anywhere i can find in GOLD 17inch 4x114.3
Coilovers i agree are expensive but how much does a lowering spring cost Brand new or used and wont i have a bumpy unstable ride after the Lowering springs ? The Tein coilover which i am looking to get costs about 800$.
The projector lights i checked with Deltaplus he told me 850.
I need to make my Custom Mesh Grill, do you know of any places where they can custom make grill ?
PS. a few months back i spotted your car in AA when you had come for service i guess, i did take some pics, will post it in your thread Your Car Looks Clean and Better in Person!
@djbill - Thanks bro, but can you give me direction to go there as i am not familiar with Al ramool roads or area. Do they make Custom Grill over there ?
About the rims i am NOT going for replicas, i am looking at Rotas or Used Genuine Rims from Al Khubair or anywhere i can find in GOLD 17inch 4x114.3
Coilovers i agree are expensive but how much does a lowering spring cost Brand new or used and wont i have a bumpy unstable ride after the Lowering springs ? The Tein coilover which i am looking to get costs about 800$.
The projector lights i checked with Deltaplus he told me 850.
I need to make my Custom Mesh Grill, do you know of any places where they can custom make grill ?
PS. a few months back i spotted your car in AA when you had come for service i guess, i did take some pics, will post it in your thread Your Car Looks Clean and Better in Person!
@djbill - Thanks bro, but can you give me direction to go there as i am not familiar with Al ramool roads or area. Do they make Custom Grill over there ?
- kruel_dude
- UB Addicted Member
- Posts:117
- Joined:27 Feb 2008, 9:37 am
- Vehicle:Mitsubishi Lancer GT
- Location:Sharjah
Al Ramool, Behind Trading Enterprise, Extreme Auto Styling (Al Monsef Garage) 050-3849491 Ahmed - All Kind of custom body works, air brush, 3d airbrush etc.
http://www.facebook.com/extremeautostyling
check on above link, some of great jobs done by them.
http://www.facebook.com/extremeautostyling
check on above link, some of great jobs done by them.
-
- UB Senior Member
- Posts:565
- Joined:07 Dec 2009, 12:43 am
- Vehicle:Nissan Altima 2008 SE
- Location:Ghussais, Dubai
Great Rotas are awesome you wont regret getting them.hk20 wrote:@real_ashwin - Thanks for the suggestion bro
About the rims i am NOT going for replicas, i am looking at Rotas or Used Genuine Rims from Al Khubair or anywhere i can find in GOLD 17inch 4x114.3
Coilovers i agree are expensive but how much does a lowering spring cost Brand new or used and wont i have a bumpy unstable ride after the Lowering springs ? The Tein coilover which i am looking to get costs about 800$.
The projector lights i checked with Deltaplus he told me 850.
I need to make my Custom Mesh Grill, do you know of any places where they can custom make grill ?
PS. a few months back i spotted your car in AA when you had come for service i guess, i did take some pics, will post it in your thread Your Car Looks Clean and Better in Person!
@djbill - Thanks bro, but can you give me direction to go there as i am not familiar with Al ramool roads or area. Do they make Custom Grill over there ?
Springs are around 200 USD for nissan tida(versa), majority of ppl have the tanbe springs
but "Megan Racing Lowering Springs" are supposed to be a more of a drop that tanabe. (found this off some versa forums)
You could always buy a mesh grill directly c-mod makes some cheap grills they have 1 grill for you
http://cmodgrilles.auctivacommerce.com/ ... 19595.aspx
If you need some1 to fabricate you could try a friend of mine Sherrin 04-3409096 @ Rover garage
850 for the projector headlights are a normal rate there with HID @ delta.
Have fun modding...
Im glad you liked my car. Next time if you see me just fell free to say hi
Last edited by real_ashwin on 17 Nov 2011, 9:02 pm, edited 1 time in total.
Don't mean to go off Topic but Does this workshop have Universal front lips or Side skirts?kruel_dude wrote:Al Ramool, Behind Trading Enterprise, Extreme Auto Styling (Al Monsef Garage) 050-3849491 Ahmed - All Kind of custom body works, air brush, 3d airbrush etc.
http://www.facebook.com/extremeautostyling
check on above link, some of great jobs done by them.
Well, Tiida could use a Lip Kit aswell not so overdone like the black one, a more Simple one would be Great.