(90% Done ! ) My Soarer project ... New Pics
Moderator:Accord98
- SoarerTO4R
- UB Addicted Member
- Posts:148
- Joined:26 Jul 2005, 3:42 am
- Vehicle:1996 Lexus SC-300
Hi everyone !!
Here is some underground shots for the work that had been so far on my lovely SOARER ( Previously with the TO4R powered 1JZ ) ......
But 1st here is a summary for what happened to my beloved lexus during the past 8 month !! :
- End of March 06 /b] Previous engine sold and took the car to Top Secret Garaj in Ajman to paint the Engine bay after installing heat shields and then paint the lights ! ...
- Begining of April untill end of OCT 06 !!! /b] I had a big ( ANd I mean Huge ! ) issue with the owner of my license plate numbers , it took me all those month to find a sollution for it .
- Begining of Nov 06 untill today !! /b] Started working on my babe again .... my beggest issue was the amount of dirt & dust on the car ,, but I've getover that ... And now its the sixth week and its almost done Inshallah , 1 more week then the car will be drivable , 2 days after that for tuning and programming then a week to ten days for the paint and inshallah my Soarer will be smokin again !!!
So now Here is the New Setup IN DETAILSSSSSSSSSSSSSSSS ::
- 2JZ-GTE engine with R154 5spd Gearbox And a TRD Diffrential
- Engine head with the following jobs done :
1. Performance Valve Springs and Titanium Retainers (Supertech Valve train)
2. Swirl polished Stainless Steel Valves (Supertech Performance)
3. Three Angle Valve Job
4. Polish , Porting & Resurface
5. New Valve Seals
6. New Valve Guides
7. APR Head Studs
- HKS 272 Intake cam & HKS 280 Exhaust Cam
- HKS Adjustable Cams poly's
- Sard Fuel Line with Sard 720
- Fuel regulator
- HKS metal Gasket mm1.2
- GReddy stainless steel turbo exhaust manifold
- GReddy Waste gate Type CH 56mm 2.0+bar
- GReddy (Mitsubishi) T88 turbine with T78 exhaust Housing ( to fasten up the spooling and limit the laggg :) )
- HKS SSBOV blow off valve
- HKS R-type Intercooler
- Ten ROW - GReddy Oil Cooler
- Walbro Fuel Pump
- TRD Single plate Clutch (Push type )
- JDM Short Shifter for lywer type Gearbox
- Supra Four Core Racing Aluminum Radiator
- Shiny TRD OIL Catch tank .
- Apexi AFC II
- Minse stand alone ECU unit
- Engine wiring Harness is a work of art done by mixing the Soarer original wiring (1JZ) and the New 2JZ wiring ( Done By Road Runner Garage )
- Nos Purge kit with two outlets
- Fifty HP Wet NOS shots - full kit -
- CRYO2 Cooling GAZ kit
- All upper engine parts have been polished to mirror like finish
- Engine bay repainted to purple
- Fire wall covered with shiny heat shields
---------------------------- Alhamdu lelahhhhhhhhhh :)
Here is some other pics......
While wrkin on the down pipe
While fitting the down pipe & the rest of the exhaust.....
Measuring the Airfilter pipe....
before fitting the intercooler piping ..
And after finishing all the piping wrk ....
And now here is what my car looked like yesterday , Bcuz I've taken all the pipes , Radiator , Intercooler , Rims and most of the engine parts to be CHROOMEEEDD to a Mirror finish Inshallah ........
I hope you like it or ....And please dont hesitate if you have any more Ideas or opinions about the Paint Colour Cuz I hav'nt decided yet !!!!!
SoooooooooooooooooooooooooN
Here is some underground shots for the work that had been so far on my lovely SOARER ( Previously with the TO4R powered 1JZ ) ......
But 1st here is a summary for what happened to my beloved lexus during the past 8 month !! :
- End of March 06 /b] Previous engine sold and took the car to Top Secret Garaj in Ajman to paint the Engine bay after installing heat shields and then paint the lights ! ...
- Begining of April untill end of OCT 06 !!! /b] I had a big ( ANd I mean Huge ! ) issue with the owner of my license plate numbers , it took me all those month to find a sollution for it .
- Begining of Nov 06 untill today !! /b] Started working on my babe again .... my beggest issue was the amount of dirt & dust on the car ,, but I've getover that ... And now its the sixth week and its almost done Inshallah , 1 more week then the car will be drivable , 2 days after that for tuning and programming then a week to ten days for the paint and inshallah my Soarer will be smokin again !!!
So now Here is the New Setup IN DETAILSSSSSSSSSSSSSSSS ::
- 2JZ-GTE engine with R154 5spd Gearbox And a TRD Diffrential
- Engine head with the following jobs done :
1. Performance Valve Springs and Titanium Retainers (Supertech Valve train)
2. Swirl polished Stainless Steel Valves (Supertech Performance)
3. Three Angle Valve Job
4. Polish , Porting & Resurface
5. New Valve Seals
6. New Valve Guides
7. APR Head Studs
- HKS 272 Intake cam & HKS 280 Exhaust Cam
- HKS Adjustable Cams poly's
- Sard Fuel Line with Sard 720
- Fuel regulator
- HKS metal Gasket mm1.2
- GReddy stainless steel turbo exhaust manifold
- GReddy Waste gate Type CH 56mm 2.0+bar
- GReddy (Mitsubishi) T88 turbine with T78 exhaust Housing ( to fasten up the spooling and limit the laggg :) )
- HKS SSBOV blow off valve
- HKS R-type Intercooler
- Ten ROW - GReddy Oil Cooler
- Walbro Fuel Pump
- TRD Single plate Clutch (Push type )
- JDM Short Shifter for lywer type Gearbox
- Supra Four Core Racing Aluminum Radiator
- Shiny TRD OIL Catch tank .
- Apexi AFC II
- Minse stand alone ECU unit
- Engine wiring Harness is a work of art done by mixing the Soarer original wiring (1JZ) and the New 2JZ wiring ( Done By Road Runner Garage )
- Nos Purge kit with two outlets
- Fifty HP Wet NOS shots - full kit -
- CRYO2 Cooling GAZ kit
- All upper engine parts have been polished to mirror like finish
- Engine bay repainted to purple
- Fire wall covered with shiny heat shields
---------------------------- Alhamdu lelahhhhhhhhhh :)
Here is some other pics......
While wrkin on the down pipe
While fitting the down pipe & the rest of the exhaust.....
Measuring the Airfilter pipe....
before fitting the intercooler piping ..
And after finishing all the piping wrk ....
And now here is what my car looked like yesterday , Bcuz I've taken all the pipes , Radiator , Intercooler , Rims and most of the engine parts to be CHROOMEEEDD to a Mirror finish Inshallah ........
I hope you like it or ....And please dont hesitate if you have any more Ideas or opinions about the Paint Colour Cuz I hav'nt decided yet !!!!!
SoooooooooooooooooooooooooN
Last edited by SoarerTO4R on 09 Jan 2007, 3:04 pm, edited 5 times in total.
Allah Allah Allah!!!
Sounds very big projet!! Good luck bro, hope you finish successfuly...
agin Good Luck
tc
Sounds very big projet!! Good luck bro, hope you finish successfuly...
agin Good Luck
tc
cool work ... congrats for it mashAllah ...its not easy to do all this until u got deep pockets and dedication for ur car ... this needs allot of time and patience .... so fingers cross for u boy ... have good luck ...
and yeah if u can keep a turbo cover on ur turbo it'll look good..u know these days u get those gray sorts covers ... over all 10/10 its amazing the engine bay is amazin ...
and yeah if u can keep a turbo cover on ur turbo it'll look good..u know these days u get those gray sorts covers ... over all 10/10 its amazing the engine bay is amazin ...
- 7aMooD TuRBo
- UB Senior Member
- Posts:780
- Joined:19 Jun 2006, 11:32 pm
- Location:Bahrain
MASHAA ALAAH MASHAA ALAAH!! honestly the car is very very very very nice and cool!! i like it alooooot!! sounds fast!! i hope u have fun with it!!
love it aloooooooooooooooooooooooooooooooooooooot!! !! nothing is wrong with the paint!!
love it aloooooooooooooooooooooooooooooooooooooot!! !! nothing is wrong with the paint!!
- mani3_Z400
- UB Junior Member
- Posts:60
- Joined:01 Sep 2006, 9:53 pm
- Location:Dubai
nice project walla , i will suggest for you one thing , in my opinion , the car STILL need cleaning , it will look amazing if it's shinny , about the paint , it's up to u , because u know , it's a soarer ,anything will look nice , keep it up
- Hammood_Junooni
- UB Senior Member
- Posts:553
- Joined:25 Jul 2005, 8:23 pm
- Location:Ajman
- Contact:
nice car man !! And Nismo....those different colours of soarer rock !
awessooommmeeee
man
ur car will surely be one of a kind...
about the paint, white looks good but it looks decent...put sumthin tht catches people's eyes and actually stands out of the other cars...
are you going to put a bodykit or maybe a spoiler??? a GT spoiler would look good on it...
keep up the good work bro...waiting for ur car to be done
man
ur car will surely be one of a kind...
about the paint, white looks good but it looks decent...put sumthin tht catches people's eyes and actually stands out of the other cars...
are you going to put a bodykit or maybe a spoiler??? a GT spoiler would look good on it...
keep up the good work bro...waiting for ur car to be done
- SoarerTO4R
- UB Addicted Member
- Posts:148
- Joined:26 Jul 2005, 3:42 am
- Vehicle:1996 Lexus SC-300
And I've already purchased a GT WING for my car ,,,its just that I ont install it untill am done with the paint
- SoarerTO4R
- UB Addicted Member
- Posts:148
- Joined:26 Jul 2005, 3:42 am
- Vehicle:1996 Lexus SC-300
Thak u all 4 the nice comments ,,,and inshallah its just a matter of time untill my babe is out ...
Anyways , I've made my mind up regarding the paint , it will be the Metalic Brandy Red ... I've already contacted Performance Motors in alBurshaa regarding the cost and the time needed for the whole paint job , I ended up with two options :
1- The Metalic ( Orange reflecting ) Brandy Red :
2- The Original Brandy Red Metalic :
So , I really like the 1st one ( Orange reflecting Paint ) but still not completly sure ,,, so what do u think guys ?!
Anyways , I've made my mind up regarding the paint , it will be the Metalic Brandy Red ... I've already contacted Performance Motors in alBurshaa regarding the cost and the time needed for the whole paint job , I ended up with two options :
1- The Metalic ( Orange reflecting ) Brandy Red :
2- The Original Brandy Red Metalic :
So , I really like the 1st one ( Orange reflecting Paint ) but still not completly sure ,,, so what do u think guys ?!