Help needed with this issue !
Moderator:Neo
- lime
- UB Senior Member
- Posts:816
- Joined:11 Jul 2009, 11:57 pm
- Vehicle:2009 Lancer GT
- Location:Sharjah
- Contact:
guys i need help , i installed 18x8.5 rims with 245/40/r18 tiers . the OEM rims are 18x7 with 215/45/r18 tiers , i had to install 6mm spacers in the back cuz the rims where hittin ginside with the HUB, now the PROBLEM is , no one can sit with me in the CAR ! cuz the raer tiers hit the body and even on very small bumps , i can hear hit hitting when i take sharp turns , i already installed H&R springs they are not very stiff in order to get a smooth ride but they are performance springs , so what do i have to do ? i dont want to roll my fenders
the rubber is stuck on the body of the car , does it rewin my tiers or no harm is done ?
the rubber is stuck on the body of the car , does it rewin my tiers or no harm is done ?
- lime
- UB Senior Member
- Posts:816
- Joined:11 Jul 2009, 11:57 pm
- Vehicle:2009 Lancer GT
- Location:Sharjah
- Contact:
problem is it only touches the inner side of the fender there is like a metal peace, ide cut it !!! cuz every time the car goes down it tocuehs itRasHooD wrote:The offset is not made for your car, either Roll fenders or flinch on every bump and turn
It does harm your tires AND the covers btw.
- Ozimandius
- UB Super Member
- Posts:3804
- Joined:09 Aug 2008, 5:13 pm
- Vehicle:Mazda Miata MX-5 NA
Capital Auto does fender rolling.
Lime get rid of those spacers as well as those rims ...
im sure ur getting vibrations as well over 80Km/hr
Spacers are the worst thing to have. If its touching cant u adjust the height? mine is touching a little as well at the moment, but ill raise it a little soon.
im sure ur getting vibrations as well over 80Km/hr
Spacers are the worst thing to have. If its touching cant u adjust the height? mine is touching a little as well at the moment, but ill raise it a little soon.
- GT ST@RLET
- UB Senior Member
- Posts:457
- Joined:09 Sep 2007, 11:35 pm
- Vehicle:lexus ls400
- Location:U.A.E.
- Contact:
i think rear sway bars would help in that ?
- Ozimandius
- UB Super Member
- Posts:3804
- Joined:09 Aug 2008, 5:13 pm
- Vehicle:Mazda Miata MX-5 NA
On Evolve:
http://www.evolve.ae/forum/search.php?k ... uthor=&fid
It'll cost approx. 250 to 300 per side, but better get it checked out first to identify the exact problem and appropriate solution.
http://www.evolve.ae/forum/search.php?k ... uthor=&fid
It'll cost approx. 250 to 300 per side, but better get it checked out first to identify the exact problem and appropriate solution.
- lime
- UB Senior Member
- Posts:816
- Joined:11 Jul 2009, 11:57 pm
- Vehicle:2009 Lancer GT
- Location:Sharjah
- Contact:
ok guys i just called my friend he works in a glass factory and i told him about my problem now the fender has a small piece going towards the inside of the body which is blockign the tier from going inside of the fender like normal so what iam going to do is head to the factory , lift my car and cut the small part my SELF no need to pay 600 dhs , and iam gonna use this tool
ill keep u guys posted , wish me luck
ill keep u guys posted , wish me luck
- AccordTuner
- UB Special Member
- Posts:1637
- Joined:17 Aug 2009, 1:25 pm
- Vehicle:Lexus LS460
- Location:Alain / Sharjah
lime wrote:ok guys i just called my friend he works in a glass factory and i told him about my problem now the fender has a small piece going towards the inside of the body which is blockign the tier from going inside of the fender like normal so what iam going to do is head to the factory , lift my car and cut the small part my SELF no need to pay 600 dhs , and iam gonna use this tool
ill keep u guys posted , wish me luck
LOOOL
true thats one Handy tool ...
i used it too to cut of a piece of my accord bdy kit cos bumper and exhaust were touching and making weird sound