Who does a good work of Camber/Tos Settings ?
Moderator:Neo
I'm pretty much sure about failing on pure bags, as Locals don't have much of a hassle in this case, the lexus in your question..
The thing is that the technical inspectors are not informative and only know the stock stuff or know and are told to disallow such things, my undertanding, so anything that doesn't look standard, they are about to start marking & barking, unless the ride belongs to locals or wasta is involved....
GLuck on your query with those low riders....but I think hey might belong to a local...
The thing is that the technical inspectors are not informative and only know the stock stuff or know and are told to disallow such things, my undertanding, so anything that doesn't look standard, they are about to start marking & barking, unless the ride belongs to locals or wasta is involved....
GLuck on your query with those low riders....but I think hey might belong to a local...
Mr.HacKeR wrote:Ya bags over coils will cost you at least 7000Dhs, I already did the math. But that's about 50% cheaper than a regular air kit, simply because you don't need air struts. I could be wrong though..
I tried talking to LAP57 about converting my coilovers into bags, but they weren't excited about it.. Maybe I should try somewhere else..
Are you sure the car won't pass if I have an air suspension?! I see a lot of crazy low lexus' on the road, usually parked. So I think they're on bags.. I will try and ask one of them
My only concern is the air tank and the compressors.. my trunk isn't exactly spacious
The only thing that matters when you go to pass your car is if you kept your car as stock as possible...your chances of passing get thinner by the amount of things you'v added
ofcorse these guys need special training on passing cars here but we are far far away from that day.
- Mr.HacKeR
- UB Dedicated Member
- Posts:272
- Joined:15 Aug 2010, 2:24 am
- Vehicle:09 Altima Coupe 3.5SE
- Location:Sharjah
There's a Lexus GS on the ground near my house, I'll try and talk to the owner. But I think you guys are right, there's noway a non-lexus will pass with bags. I guess I have to try the new air system (bagless)
Have you guys heard of the cup kit?
http://www.youtube.com/watch?v=1z1n-zINGm0
(SKIP TO 0:20)
Have you guys heard of the cup kit?
http://www.youtube.com/watch?v=1z1n-zINGm0
(SKIP TO 0:20)
Mr.HacKeR wrote:There's a Lexus GS on the ground near my house, I'll try and talk to the owner. But I think you guys are right, there's noway a non-lexus will pass with bags. I guess I have to try the new air system (bagless)
Have you guys heard of the cup kit?
http://www.youtube.com/watch?v=1z1n-zINGm0
(SKIP TO 0:20)
DEAD EXPENSIVE
reason why you get them on ferarri's
http://www.airsociety.net/forums/showth ... -Explained / not too deep but illustrated...
you know...technically you dont even need a coilover to do this setup...and its not like a coilover airbag setup is going to allow you to track race...i just gave my OEM shocks to this guy who has 15 years of expirience in air bagging...should be done in a few days as long as he works on it
(keeping in mind this is all about street stance and NO track performance)
will update soon
(keeping in mind this is all about street stance and NO track performance)
will update soon
- Mr.HacKeR
- UB Dedicated Member
- Posts:272
- Joined:15 Aug 2010, 2:24 am
- Vehicle:09 Altima Coupe 3.5SE
- Location:Sharjah
I don't think it is a good idea to do this to your OEM Shocks, Coilovers can handle being driven with a low ride height, but OEM shocks won't. They will fail sooner than any coilover, it is worse than putting lowering springs on your OEM shocks.CaL][CaB wrote:you know...technically you dont even need a coilover to do this setup...and its not like a coilover airbag setup is going to allow you to track race...i just gave my OEM shocks to this guy who has 15 years of expirience in air bagging...should be done in a few days as long as he works on it
(keeping in mind this is all about street stance and NO track performance)
will update soon
AND Please PM the details of this guy/shop and how much is he charging you?
luckily I still didn't order anything
Good luck with your build!
KO,
I'm seriously having a hard time deciding between these kits & Wheels, now that I have found somebody to do it, willing to help me decide, these are built to order, both kits & Wheels:
Job Design:
http://sphotos-e.ak.fbcdn.net/hphotos-a ... 6120_n.jpg
http://sphotos-g.ak.fbcdn.net/hphotos-a ... 2152_n.jpg
Gamu Regalia
http://sphotos-c.ak.fbcdn.net/hphotos-a ... 9983_n.jpg
http://sphotos-b.ak.fbcdn.net/hphotos-a ... 4595_n.jpg
Gamu
http://sphotos-b.ak.fbcdn.net/hphotos-a ... 1024_n.jpg
Gamu-2
http://sphotos-h.ak.fbcdn.net/hphotos-a ... 5268_n.jpg
Wheels:
Ordens:
http://kyoei-usa.com/prodimages/lhordenc.jpg
Varianza V5S:
http://www.flickr.com/photos/workwheels ... 018801201/
Work Schwert Sc2:
http://yhst-85269766349317.us-dc1-edit. ... 222_360872
Thank You
I'm seriously having a hard time deciding between these kits & Wheels, now that I have found somebody to do it, willing to help me decide, these are built to order, both kits & Wheels:
Job Design:
http://sphotos-e.ak.fbcdn.net/hphotos-a ... 6120_n.jpg
http://sphotos-g.ak.fbcdn.net/hphotos-a ... 2152_n.jpg
Gamu Regalia
http://sphotos-c.ak.fbcdn.net/hphotos-a ... 9983_n.jpg
http://sphotos-b.ak.fbcdn.net/hphotos-a ... 4595_n.jpg
Gamu
http://sphotos-b.ak.fbcdn.net/hphotos-a ... 1024_n.jpg
Gamu-2
http://sphotos-h.ak.fbcdn.net/hphotos-a ... 5268_n.jpg
Wheels:
Ordens:
http://kyoei-usa.com/prodimages/lhordenc.jpg
Varianza V5S:
http://www.flickr.com/photos/workwheels ... 018801201/
Work Schwert Sc2:
http://yhst-85269766349317.us-dc1-edit. ... 222_360872
Thank You
- Mr.HacKeR
- UB Dedicated Member
- Posts:272
- Joined:15 Aug 2010, 2:24 am
- Vehicle:09 Altima Coupe 3.5SE
- Location:Sharjah
If I were you I'd choose the Job Design kit:
http://sphotos-e.ak.fbcdn.net/hphotos-a ... 6120_n.jpg
http://sphotos-g.ak.fbcdn.net/hphotos-a ... 2152_n.jpg
And the WORK Varianza V5S wheels (They work will with the chrome Grille and parts on the bumper & I love the deep lip):
http://www.flickr.com/photos/workwheels ... 018801201/
Just one thing, which size wheels are you planning on getting? You need something with a large lip, the ones in the picture are 19" wheels. To my knowledge, the lower the size (and width) of a wheel, the smaller the lip will be. Just wanted you to pay attention to this.
http://sphotos-e.ak.fbcdn.net/hphotos-a ... 6120_n.jpg
http://sphotos-g.ak.fbcdn.net/hphotos-a ... 2152_n.jpg
And the WORK Varianza V5S wheels (They work will with the chrome Grille and parts on the bumper & I love the deep lip):
http://www.flickr.com/photos/workwheels ... 018801201/
Just one thing, which size wheels are you planning on getting? You need something with a large lip, the ones in the picture are 19" wheels. To my knowledge, the lower the size (and width) of a wheel, the smaller the lip will be. Just wanted you to pay attention to this.