Page 1 of 1

Help on Tires and Rims Selection

Posted: 12 Apr 2017, 10:53 am
by enshi26
Hi Gents,

Just asking what Tires and wheels will fit into my car, its a Mitsubishi Attrage, its a basic car not much of a feature but wants to have a good look on it. I prepare to put a wide one and 16", but dont know if it will match the specs of my car. anyone here please feel free to comment.. thanks

I attached a photo which I want my car also to look like..

Re: Help on Tires and Rims Selection

Posted: 13 Jun 2017, 9:30 am
by leoparker990
First tell what's the model of your car?

Re: Help on Tires and Rims Selection

Posted: 13 Jun 2017, 11:29 am
by ali900
Well I think the Attrage (one available here) is the same model since 2014? I’m not sure about imports and other variances.

Below is the information from tirerack/wheelsize (websites you can check out yourself)
Mitsubishi Attrage 2015
– Center Bore: 56.1 mm
– Lug Size: M12 x 1.5
– Trim Production: [2013...2016]

STOCK WHEELS/RIMS :roll:

STANDARD:
TIRE 175/65R14 ---- RIM 4.5Jx14 ET46 with PCD 4X100

Optional rim (maximum size given?)
TIRE 185/55R15 ---- RIM 5Jx15 ET46 with PCD 4X100

This will give you a general idea of what your STOCK rims are like and what you could replace it with without too much work. I’m guessing 16s would fit but you’d need a thinner/lower profile tire + ensure it doesn’t rub. Are you planning for lowering or upgrading suspension? 8-)

For offset you may need spacer or adapters for other types of wheel. Keep this in mind. My advice would be if you can, go to some tire shop and look at your options. Plenty around and they will provide some ideas for your options. You’ve also not mentioned a budget so you can ask them and at least get an idea of what the costs will be like. Good luck!