to the experts out there.... (i probably knw these tings by name, but have no clue what they look like - hence the question!)
what are these things ?????
A differnt shot of the bay...
and this is the list of mods.... maybe they will help u out....
2000 B18C1 Motor Stock internals
Max Rev intercooler
Max Rev downpipe
Max Rev Manifold
Tial 35mm wastegate
Burns stainless custom made wastegate dump tube
Garret t3/to4e 57 trim, .60 ar compressor, .63 ar exhaust
Burns stainless piping after the intercooler 2.25" Custom made
Burns alumnium piping before the intercooler 2.25" Custom made
Burns stainless piping to the turbo with apexi filter and custom made filter adapter 2.5"
Tanabe Super Racing Medallion Exhaust (stainless steel)
APEXi Filter
Turbo XS RFL BOV
T-bolt clamps on all charge piping
Earls braided -4an feed to turbo with restrictor
Earls braided -10an return line
RC 550 CC injectors
AEM Fuel Rail
AEM FPR
Hondata S200b
Turbo XS manual boost controller
Action Clutch
ACT Prolite Flywheel
Autometer Boost gauge
Defi Oil pressure gauge
Defi Fuel pressure gauge
Defi EGT gauge
Produces - 275whp and 204tq at 10psi
Quesions on this Engine?
- t-dogg
- UB Dedicated Member
- Posts:273
- Joined:20 Feb 2006, 8:06 am
- Location:Dubai Or Auckland, New Zealand
bottom one is an external wastegate..
middle is some sort of breather..
top one is a gauge.. fuel pressure regulator? dunno.. cant really tell from the pic
and the one on the side is a blowoff valve
middle is some sort of breather..
top one is a gauge.. fuel pressure regulator? dunno.. cant really tell from the pic
and the one on the side is a blowoff valve
-
- UB Super Member
- Posts:4580
- Joined:11 Sep 2005, 1:41 pm
- Vehicle:Lexus IS300
- Location:Dubai, UAE
- Contact:
Yes, the one on the exhaust manifold (right most circle)is the wastegate. The Tial 35mm wastegate:
The "thing" on the bottom left close by the filter on the picture is the blow off valve..
The gauge at the top left, as tdogg said is indeed (i guess) an FPR - fuel pressure regulator, if you follow the black line it's on you can see it's going to the fuel rail.
The little airfilter is just a filter breather.
That's a nice engine bay though..
The "thing" on the bottom left close by the filter on the picture is the blow off valve..
The gauge at the top left, as tdogg said is indeed (i guess) an FPR - fuel pressure regulator, if you follow the black line it's on you can see it's going to the fuel rail.
The little airfilter is just a filter breather.
That's a nice engine bay though..
-
- UB Super Member
- Posts:4580
- Joined:11 Sep 2005, 1:41 pm
- Vehicle:Lexus IS300
- Location:Dubai, UAE
- Contact:
This breather filter assures only clean is filtered air is drawn in. It collect oil mist to protect the system. Oil mist comes from the crankcase that is produced by pressurisation of the sump.Accord98 wrote:whats the use of a Filter Breather ?
Normally, any modern car has a oil/air separator and is connected to your (cold ) air intake. Unfortunately, this is not a perfect world, and sometimes oil mist is fed back into the air intake.
If that made any sense?