Mazda 3 Check Engine Light - Need Help, Advice

ECUs, intakes, turbos, fluids, transmissions, exhausts etc.
User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 06 Sep 2012, 8:30 am

Hello guys, I had this Check Engine Light just 2 days ago while heading home, I checked the gas cap as refer to some guys which might not properly tightened but everything is fine, I didn't feel any changes while driving it...

I'm wondering as to where I could have it check using that diagnostic tool reader for a reasonable cost, can anyone advice me where to go?

User avatar
wek-236
UB Advanced Member
Posts:1249
Joined:21 Feb 2006, 2:46 pm
Vehicle:s2k and Mazda 3
Location:Dubai/Philippines

Post by wek-236 » 06 Sep 2012, 8:51 am

anything unusual? is it running ok?

if it is, most probably you have a busted 02sensor.

Mazda 3 has 2 02sensor. each roughly cost around 375dhs bnew in sharjah.

where are you staying?

i can ask my friend to bring his obd2 scanner. if you can drop by Al ghusais tonight near zulekha/al nahda pond park. we can check it out.

User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 06 Sep 2012, 1:15 pm

wek-236 wrote:anything unusual? is it running ok?

if it is, most probably you have a busted 02sensor.

Mazda 3 has 2 02sensor. each roughly cost around 375dhs bnew in sharjah.

where are you staying?

i can ask my friend to bring his obd2 scanner. if you can drop by Al ghusais tonight near zulekha/al nahda pond park. we can check it out.
Hi wek-236 thanks for the reply, so far I don't feel any unusual from my Mazda 3,
I'm staying near Century Mall and Dubai Bowling Center.

How much would it cost for the odb2 scanning?

Sent you PM wek-236

usaf23
UB Special Member
Posts:1635
Joined:14 Jun 2006, 1:13 pm
Vehicle:2016 Jeep SRT

Post by usaf23 » 06 Sep 2012, 2:51 pm

i have the same thing going on as we speak in my mazda3..
acceleration jerky bitween 2000-3000rpm and then it gets fine..
did a computer diagnosis.. founf out cylinder2 is misfiring.. gona try gettin the spark plugs changed for a start and then check if its much serious.

User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 06 Sep 2012, 5:01 pm

usaf23 wrote:i have the same thing going on as we speak in my mazda3..
acceleration jerky bitween 2000-3000rpm and then it gets fine..
did a computer diagnosis.. founf out cylinder2 is misfiring.. gona try gettin the spark plugs changed for a start and then check if its much serious.
Hi usaf23, which brand of spark plugs you used now? as I dont know which one is best Bosch or NGK, as I am also planning to change my spark plugs hoping and might help solve the issue.

User avatar
7afe
UB Senior Member
Posts:404
Joined:01 Dec 2010, 1:45 am
Vehicle:Lexus SC 300 5 SPD

Post by 7afe » 06 Sep 2012, 7:52 pm

Sparkplugs would depend on cars mileage, How about giving us more detail about your car? Year, Mileage.
Cylinder misfire would easily be noticeable while driving as the car would be missing while acceleration. Your best bet would be getting a OBDII scanner and self scan or getting it scanned from a local garage before throwing money into it. Even if you do get your problem fixed, the code might be needed to clear off via scan tool. So i would recommend you to get it diagnosed before throwing money into it.
(Y)

User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 08 Sep 2012, 3:01 pm

7afe wrote:Sparkplugs would depend on cars mileage, How about giving us more detail about your car? Year, Mileage.
Cylinder misfire would easily be noticeable while driving as the car would be missing while acceleration. Your best bet would be getting a OBDII scanner and self scan or getting it scanned from a local garage before throwing money into it. Even if you do get your problem fixed, the code might be needed to clear off via scan tool. So i would recommend you to get it diagnosed before throwing money into it.
(Y)
Hi 7afe, thanks for you reply from this thread and thanks for your advice, I'm driving Mazda 3 2008 1.6L with 87K+ mileage. I actually bought this from 64K+ mileage, til this time I only changed the Tyres, Brake Pads (not original with squeaking sound) and regular Change Oil every 10K with Oil Filter.

Yahh right I should scan the error before jumping to any conclusion, actually I just changed my oil yesterday even if not yet due to change as my colleague advices me to do which actually didn't help.

I have checked now the error code from Sharjah today and its P0031 - Oxygen (A/F) Sensor Heater Control Circuit Low (Bank 1 Sensor 1) http://www.obd-codes.com/p0031 also visited Mazda Galadari to ask advice about the error code and they said that the Oxygen Sensor malfunction and advice me to change but they don't have current stock for the Oxygen Sensor and told me to come back on Sept16.


....
Last edited by DuaneKier on 08 Sep 2012, 3:21 pm, edited 4 times in total.

User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 08 Sep 2012, 3:10 pm

wek-236 wrote:anything unusual? is it running ok?

if it is, most probably you have a busted 02sensor.

Mazda 3 has 2 02sensor. each roughly cost around 375dhs bnew in sharjah.

where are you staying?

i can ask my friend to bring his obd2 scanner. if you can drop by Al ghusais tonight near zulekha/al nahda pond park. we can check it out.
Hi wek-236, your are right its 02 sensor, do you have any idea where to buy this 02 sensor in sharjah, exact store and street? as we are checking on it shop by shop but they dont have stock, they advice me to check from Mazda Galadari Sharjah but also to stock.

User avatar
wek-236
UB Advanced Member
Posts:1249
Joined:21 Feb 2006, 2:46 pm
Vehicle:s2k and Mazda 3
Location:Dubai/Philippines

Post by wek-236 » 09 Sep 2012, 12:17 pm

BMW road. pass the first intersection after sahara. youll get to another intersection. past the 2nd one. youll see it on your right. a big Mazda sign. 375dhs for the 02 sensor.

User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 13 Sep 2012, 1:38 pm

wek-236 wrote:BMW road. pass the first intersection after sahara. youll get to another intersection. past the 2nd one. youll see it on your right. a big Mazda sign. 375dhs for the 02 sensor.

Thanks a lot wek-236, I will check this on Saturday, hopefully they have stock of 02 sensor.

User avatar
DuaneKier
UB Junior Member
Posts:35
Joined:26 Jun 2012, 11:34 am
Vehicle:Mazda 3 Sedan 2008
Location:Dubai, UAE

Post by DuaneKier » 24 Sep 2012, 1:33 pm

Done changing my front 02 sensor, check engine light now is gone, it cost me AED585 from Mazda that includes installation.



Post Reply