Turbo Kit (Newbies)
you will need:
-turbo
-intercooler + lower and upper pipping
-turbo manifold
- 02 housing
- exhaust system
- intake
- injectors
- fuel pump
- ECU
- lots of money because your accord is not made to be boosted ....and will break done
stay away from boosting Honda's that are made to be economical..Instead boost Honda's that are made to be raced -like all the B-series engines etc etc.
Dont get me wrong I am sure there is a way to boost your accord - but I doubt it will last long...
why dont you just buy a piece of shit RHD JDM civic/integra and put a small turbo on it (nothing fancy, just small). And then take it to the track ....
-turbo
-intercooler + lower and upper pipping
-turbo manifold
- 02 housing
- exhaust system
- intake
- injectors
- fuel pump
- ECU
- lots of money because your accord is not made to be boosted ....and will break done
stay away from boosting Honda's that are made to be economical..Instead boost Honda's that are made to be raced -like all the B-series engines etc etc.
Dont get me wrong I am sure there is a way to boost your accord - but I doubt it will last long...
why dont you just buy a piece of shit RHD JDM civic/integra and put a small turbo on it (nothing fancy, just small). And then take it to the track ....
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
Yeah you are right, there are turbos available for 900 bucks in dragon mart.
But like tamu said there is lot more to building a kit than just a turbo.
Also the quality will be poor and this will definitely break the engine if the boost doesn't.
But like tamu said there is lot more to building a kit than just a turbo.
Also the quality will be poor and this will definitely break the engine if the boost doesn't.
- RasHooD
- UB Special Member
- Posts:2205
- Joined:04 Oct 2007, 4:10 pm
- Vehicle:Nissan Cefiro A31 Turbo
- Location:Sharjah - UAE
internals are not to be forgotten!
if im not mistaken the '96 accord has a piece of shit single cam f22 motor? which without any boosted assistance tends to give way to crank/connecting rods/pistons/valves etc so i cant imagine how it would be with around 10 PSI!
and those Chinese turbo's are, well...
Chinese
if im not mistaken the '96 accord has a piece of shit single cam f22 motor? which without any boosted assistance tends to give way to crank/connecting rods/pistons/valves etc so i cant imagine how it would be with around 10 PSI!
and those Chinese turbo's are, well...
Chinese
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
I know nothing about an accord motor....
But i know slapping on a turbo is no easy job.
Well I dont have anything against chinese products becoz i believe even the well branded turbos must be made in china but with stringent Quality control and track proven R&D
But i know slapping on a turbo is no easy job.
Well I dont have anything against chinese products becoz i believe even the well branded turbos must be made in china but with stringent Quality control and track proven R&D
- zeez06
- UB Addicted Member
- Posts:161
- Joined:28 Sep 2008, 11:59 pm
- Vehicle:2008 C6 Z06
- Location:25° 20' 45" N / 55° 23' 45" E
Well Rashood i would have to disseagree with you on that one, single cams I think is one donkey of an engine, I had countless friends that had them turboed and ran them for over 6 months at 10psi with no problems. The only one’s that blew them ran 16psi or over and this was due to constent abuse. I personally have had over 20 swaps in the past 5 years from d series to k series never the less even in my z here in dubai lol. I think with all these motors that i have blown were due to constent abuse and bad tune.RasHooD wrote:internals are not to be forgotten!
if im not mistaken the '96 accord has a piece of shit single cam f22 motor? which without any boosted assistance tends to give way to crank/connecting rods/pistons/valves etc so i cant imagine how it would be with around 10 PSI!
and those Chinese turbo's are, well...
Chinese
I know i know u will be like dude you shouldnt be talkin after blowin all these engins but trust me when i mean abuse i mean 5-10 races per night.
- zeez06
- UB Addicted Member
- Posts:161
- Joined:28 Sep 2008, 11:59 pm
- Vehicle:2008 C6 Z06
- Location:25° 20' 45" N / 55° 23' 45" E
http://videos.streetfire.net/video/Turb ... _62161.htm
i found this vid of my buddies semi built h22 on low boost (back in the days)
i found this vid of my buddies semi built h22 on low boost (back in the days)
- RasHooD
- UB Special Member
- Posts:2205
- Joined:04 Oct 2007, 4:10 pm
- Vehicle:Nissan Cefiro A31 Turbo
- Location:Sharjah - UAE
not really, i agree single cams have quite some potential when boosted, but the tendency to take the risk and always abuse is too high which makes it 100% certain that a blow is on the way...
usually the civic d series is better suited to low boost...
very cool video btw... lovin' the higher end hike
usually the civic d series is better suited to low boost...
very cool video btw... lovin' the higher end hike
-
- UB Junior Member
- Posts:1
- Joined:16 Apr 2009, 2:00 pm
thanks man i learnt alot frm this...
- ekU
- UB Senior Member
- Posts:507
- Joined:15 Feb 2007, 9:50 am
- Vehicle:05 Z33 6MT TN ST + 92 mark2 1JZ TT
- Location:shj industrial area 17.
zeez06 wrote:Well Rashood i would have to disseagree with you on that one, single cams I think is one donkey of an engine, I had countless friends that had them turboed and ran them for over 6 months at 10psi with no problems. The only one’s that blew them ran 16psi or over and this was due to constent abuse. I personally have had over 20 swaps in the past 5 years from d series to k series never the less even in my z here in dubai lol. I think with all these motors that i have blown were due to constent abuse and bad tune.RasHooD wrote:internals are not to be forgotten!
if im not mistaken the '96 accord has a piece of shit single cam f22 motor? which without any boosted assistance tends to give way to crank/connecting rods/pistons/valves etc so i cant imagine how it would be with around 10 PSI!
and those Chinese turbo's are, well...
Chinese
I know i know u will be like dude you shouldnt be talkin after blowin all these engins but trust me when i mean abuse i mean 5-10 races per night.
u sweaped a honda motor in 350Z. how was it???
evn i will be doing a swap 1nce this recesion is over, and also there is other possibilties that i may sell my z and go for a 90's street fighter
nice info on the Turbo kit's i was looking for some to explain just the Way u did ahaheheh
will i got my explain abut turbo
hey i wana ask turbo will work grr88 on caprice 04-06 bcoz i was having caprice 01 but heating 8 other Prblems got me to sell soo i am buying caprice 04-6 SS soo will turbo sitt on it will or have some problem in the engine & some spces of turbo will work perfects on caprice & if i install in Caprice Turbo kit'as can i install that same on another car like 2J hmmm
Reply me soon as Possible
Peace
Oj
will i got my explain abut turbo
hey i wana ask turbo will work grr88 on caprice 04-06 bcoz i was having caprice 01 but heating 8 other Prblems got me to sell soo i am buying caprice 04-6 SS soo will turbo sitt on it will or have some problem in the engine & some spces of turbo will work perfects on caprice & if i install in Caprice Turbo kit'as can i install that same on another car like 2J hmmm
Reply me soon as Possible
Peace
Oj