LED's on Nissan Patrol

Body kits, paint jobs, stickers, lights, bumpers etc.

Moderator:Neo

akewalram
UB Junior Member
Posts:66
Joined:26 Jun 2011, 1:44 am
Vehicle:2011 Nissan Patrol LE 400HP
Location:Dubai

Post by akewalram » 06 Jul 2011, 6:31 am

I'm thinking of putting LED's onto my Nissan Patrol.. The LED's I'm looking at most likely

http://dubai.dubizzle.com/classified/au ... =2&page=20

these.. and I'm planning on attaching them onto the car in the under part of the bumper, that small gap that is there underneath the number plate. You can see in these photos of my car where it would ideally fit.

Image

Image

Image

Also I was planning on putting not just 2 sets of LED's on the side of that panel but one along the whole thing so it's like a complete line..

Any ideas or suggestions or comments are welcomed!

Thank you.

User avatar
kartoos100
UB Senior Member
Posts:788
Joined:16 Sep 2006, 4:50 pm
Vehicle:08 IS300 + 05 Civic
Location:Sharjah, UAE

Post by kartoos100 » 06 Jul 2011, 7:50 am

My suggestion can be summed up in two letters

N O

real_ashwin
UB Senior Member
Posts:565
Joined:07 Dec 2009, 12:43 am
Vehicle:Nissan Altima 2008 SE
Location:Ghussais, Dubai

Post by real_ashwin » 06 Jul 2011, 8:23 am

imo that car already has issues with its design (compared to the older model), adding LEDs would only make it look worse.

Get rid of the clear lights at the back, fabricate a better front bumper or change that grill.

Also: PS the new patrol rocks with its new gadgets and power. But its got 2 much chrome all around and frankly the body is less aggressive than the old1.

check what this guy did btw:
http://www.youtube.com/watch?v=YyvlL5Tb ... re=related

Its not very aggressive but its atleast different.

User avatar
Ozimandius
UB Super Member
Posts:3804
Joined:09 Aug 2008, 5:13 pm
Vehicle:Mazda Miata MX-5 NA

Post by Ozimandius » 06 Jul 2011, 9:05 am

It'll look like a Range Rover with the LEDs from a distance.

User avatar
TNT
UB Super Member
Posts:4194
Joined:12 Jun 2007, 1:25 pm
Vehicle:Jeep Wrangler
Location:Dubai, UAE

Post by TNT » 06 Jul 2011, 12:42 pm

Nice photography, welcome to the boards.
About the LEDs, stay away. You'll look like a LC wannabe.

User avatar
fahad992
UB Senior Member
Posts:430
Joined:22 Nov 2009, 2:01 pm
Vehicle:PathfindeR
Location:RAK-AD

Post by fahad992 » 06 Jul 2011, 1:43 pm

dont put the these cheap ones , if u wana put buy those philips one ,that cost around 450-500 but it has warranty too

usaf23
UB Special Member
Posts:1635
Joined:14 Jun 2006, 1:13 pm
Vehicle:2016 Jeep SRT

Post by usaf23 » 06 Jul 2011, 2:41 pm

dont put it...
i guess it also isnt allowed by RTA during passing.

User avatar
TNT
UB Super Member
Posts:4194
Joined:12 Jun 2007, 1:25 pm
Vehicle:Jeep Wrangler
Location:Dubai, UAE

Post by TNT » 06 Jul 2011, 3:23 pm

Allowed ^

usaf23
UB Special Member
Posts:1635
Joined:14 Jun 2006, 1:13 pm
Vehicle:2016 Jeep SRT

Post by usaf23 » 06 Jul 2011, 7:44 pm

funny cause a few months back for myself as well as 2 of my other friends failed because it said remove addition light fixtures bla bla..

members is it allowed again ??

akewalram
UB Junior Member
Posts:66
Joined:26 Jun 2011, 1:44 am
Vehicle:2011 Nissan Patrol LE 400HP
Location:Dubai

Post by akewalram » 07 Jul 2011, 12:22 am

real_ashwin wrote:imo that car already has issues with its design (compared to the older model), adding LEDs would only make it look worse.

Get rid of the clear lights at the back, fabricate a better front bumper or change that grill.

Also: PS the new patrol rocks with its new gadgets and power. But its got 2 much chrome all around and frankly the body is less aggressive than the old1.

check what this guy did btw:
http://www.youtube.com/watch?v=YyvlL5Tb ... re=related

Its not very aggressive but its atleast different.
Not a fan of his front bumper.. Body wise I don't think I'm going to go as far as changing full kits BUT I am going to put the the City Edition Bumper most likely and there is one available which already has LED's built in

Image

You can kinda see them in this picture but I've seen the bumper in first hand it looks pretty aggressive and sick. I'd gone with the normal bumper when I got the car because I thought I'd be heading to the desert a lot but I have another car for that.

About the chrome parts a friend of mine got all the chrome on his car wrapped in black foil it looks great..

Here are a few professional pictures you'll most likely see his car Number plate C 500

Image

Image

Image

Image

Image

Image

User avatar
TNT
UB Super Member
Posts:4194
Joined:12 Jun 2007, 1:25 pm
Vehicle:Jeep Wrangler
Location:Dubai, UAE

Post by TNT » 07 Jul 2011, 12:41 am

Your friend's car is quite famous, seen it in a couple of magazines.

akewalram
UB Junior Member
Posts:66
Joined:26 Jun 2011, 1:44 am
Vehicle:2011 Nissan Patrol LE 400HP
Location:Dubai

Post by akewalram » 07 Jul 2011, 8:24 am

TNT wrote:Your friend's car is quite famous, seen it in a couple of magazines.
Yeah I know most of the new Patrol owners, we started a group it didn't really catch on but I know most of them..

real_ashwin
UB Senior Member
Posts:565
Joined:07 Dec 2009, 12:43 am
Vehicle:Nissan Altima 2008 SE
Location:Ghussais, Dubai

Post by real_ashwin » 07 Jul 2011, 8:27 am

akewalram wrote: You can kinda see them in this picture but I've seen the bumper in first hand it looks pretty aggressive and sick. I'd gone with the normal bumper when I got the car because I thought I'd be heading to the desert a lot but I have another car for that.

About the chrome parts a friend of mine got all the chrome on his car wrapped in black foil it looks great..
wow id love to see the bumper you want to buy. If you can get a clear pic it would be awesome.

Also the matt black looks awesome some might prefer carbon fibre also however instead of getting the work done @ fibra you can save your self some cash and go to any installer and get it done cheaper. Evolve does it i believe they stock matt black too. If you want it even cheaper ajman for like 100 AED supply and install (some cheap vinyl).

akewalram
UB Junior Member
Posts:66
Joined:26 Jun 2011, 1:44 am
Vehicle:2011 Nissan Patrol LE 400HP
Location:Dubai

Post by akewalram » 09 Jul 2011, 5:36 pm

I'm definitely getting the carbon fibre wrap done on the mirrors for now.. maybe a few other parts later on though.

I've seen the bumper up close trust me it look's really good there is another bumper not shown here just not vertical their horizontal that one looks great too but I really like the vertical ones they look mean along with the bumper of course.

User avatar
holydevil27
UB Addicted Member
Posts:195
Joined:10 Feb 2007, 1:22 pm

Post by holydevil27 » 25 Oct 2011, 4:30 pm

Make sure you do it from a decent place like gulf foil. I can get you a good price too..



Post Reply