Page 2 of 2

Re: Fender Rolling

Posted: 01 Mar 2009, 4:56 pm
by toleg
albertho555 wrote:Please check Performance Magazine, i remember they had 3 places mentioned for fender rolling in the classifieds section. Mansour tires? just check ... cant remember exactly.
yes al mansour do it
as par as i remember they charge 1000.aed for four tires/sides
same charge if you ask for 1 though :D

you can DIY it also but dont forget to buy extra paint for touch up after you ruin your paint job :roll: (Y)

Re: Fender Rolling

Posted: 07 Dec 2009, 9:38 pm
by grayfox666
So did anyone actually do fender rolling at the above mentioned places?
I need it done badly as i rub like hell at th rear tires on small bumps on Stock suspention.

Re: Fender Rolling

Posted: 07 Dec 2009, 11:33 pm
by kingkenny
most track evo did !!

Re: Fender Rolling

Posted: 10 Feb 2010, 1:05 pm
by SoarerTO4R
hey everyone ,,, we do them in our garage in SHJ and they are really nice , please feel free to come to the garage and have a look at ready products .

The process involves painting so , be ready for that !!

The cost is AED 400 per corner and the price might go a littile up if you had a special paint job or a unique color code .

Re: Fender Rolling

Posted: 17 Feb 2010, 7:39 pm
by grayfox666
Do you do rolling or pulling? Why does the paint get damaged?

Re: Fender Rolling

Posted: 18 Feb 2010, 1:24 am
by Rogue
hey soarer ... can u give a lil more precise info ... cuz me n greyfox will both show up !!!

Re: Fender Rolling

Posted: 18 Feb 2010, 4:38 am
by SoarerTO4R
grayfox666 wrote:Do you do rolling or pulling? Why does the paint get damaged?
SoarerTO4R wrote: The process involves painting so , be ready for that !!

The cost is AED 400 per corner and the price might go a littile up if you had a special paint job or a unique color code .

Re: Fender Rolling

Posted: 18 Feb 2010, 12:21 pm
by grayfox666
Hey, Soarer. Could you please PM a location or a number for the place?
No probs with bamaged paint as car needs to be resprayed anyway.

Thanks

Re: Fender Rolling

Posted: 18 Feb 2010, 1:33 pm
by WKZ
^^
The paint cracks as the fender is widened but minor rolling usually does not need a paint job as the paint is usually heated at a certain degree so that the paint spreads along the fender when its rolled.You can DIY but I wouldn't suggest a DIY because you have to be quite accurate with this.

Re: Fender Rolling

Posted: 18 Feb 2010, 6:12 pm
by Rogue
yh there loads od DIY vids around but if u screw up ... its not like a headlight or somethinng which u can go n jus buy so yh not advisable ....greyfox wen u go call me as well ok !!! send me the location as well !!!

Re: Fender Rolling

Posted: 25 Feb 2010, 6:18 pm
by Rogue
BUMP !!! RRUBBBBB !!! GGGGGGRRRRRRRRRR !!!!!!!! number soarer !!!

Re: Fender Rolling

Posted: 04 Mar 2010, 9:43 am
by Rogue
ok guys ... actually got my fenders rolled ... pretty good job ... quite a bit of paint crack ... but on the bent fender so it aint really seen .... i'll call n tell u abt it greyfox ... as for the rest they took 500 at al mansoor tyres for the rear 2 ... location is behind gold n daimond park on shk zayed road !

Re: Fender Rolling

Posted: 04 Mar 2010, 9:56 am
by docaam
pictures?????do you have any idea how many cm/inches it came out??

Re: Fender Rolling

Posted: 04 Mar 2010, 9:58 am
by Rogue
they havent really pulled anything out ... they basically pushed the fender up or in ... i'll post pics ... cars looks like it was in WRC right now ...also ill post pics on gtz !