Sound proofing!!! Where can i buy?
Moderator:Neo
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
As the topic suggests.
1) Where did you guys get your sound proofing done?
2) Where did you buy the sound proofing material?
3) Which brand did you use?
4) How much did you pay for it?
5) Any suggestions?
Mods I believe this topic lies in the right place. Please take action if it isnt.
1) Where did you guys get your sound proofing done?
2) Where did you buy the sound proofing material?
3) Which brand did you use?
4) How much did you pay for it?
5) Any suggestions?
Mods I believe this topic lies in the right place. Please take action if it isnt.
- inkedpiercedemo
- UB Senior Member
- Posts:488
- Joined:05 Mar 2007, 6:41 pm
- Vehicle:97 eclipse GSX + 08 LancerEX gt
- Location:KARAMA-dubai
ive seen yellowhat and autoplus sell and install sound proofing for all cars..check it out...
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
Thanks dude...
Yellow has got stuff and i have been buying them...
It is not enough and too expensive. I was looking for an alternative.
Auto Plus has dynamat and they have been ripping me off for all the stuff that i brought.
Wanted to know if someone else had another option which i missed out.
Yellow has got stuff and i have been buying them...
It is not enough and too expensive. I was looking for an alternative.
Auto Plus has dynamat and they have been ripping me off for all the stuff that i brought.
Wanted to know if someone else had another option which i missed out.
I got 4 rolls of dynamat (dont remember the dimensions), from HSV. Price was around 250 a roll, which is on the steap side of things!!! I applied the role myself on door panels and trunk.
Installing it I would give it a 7/10 for how hard it was.
Price i give it 5/10
quality 8/10
I ended up doing double layers in some places of the trunk bcoz the dynamat couldnt stop the rattle.!!!
I am intrested to know if there are other types of sound proofing in the market as well besides dynamat?
Installing it I would give it a 7/10 for how hard it was.
Price i give it 5/10
quality 8/10
I ended up doing double layers in some places of the trunk bcoz the dynamat couldnt stop the rattle.!!!
I am intrested to know if there are other types of sound proofing in the market as well besides dynamat?
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
There are lot of brands.
For example in yellow hat there is a jap brand Called AODEA which i have used in my car so far.
But the door Kit itself cost me 400 Dhs and I think it was an over kill.
Yesterday I opened up the door and I think I will re-do the door again soon.
Now I have ordered FAT mat which is 50 SQ FEET in size. Lets see...
I will post pics of my project soon. Thinking about setting up a blog.
For the Door did you do inside and outside panel?
Yes the side fenders for my coupe will definitely require two or three layers.
I am planning to do complete coverage including top and bottom.
Car is stripped down to front seats and been using it for the past two weeks.
For example in yellow hat there is a jap brand Called AODEA which i have used in my car so far.
But the door Kit itself cost me 400 Dhs and I think it was an over kill.
Yesterday I opened up the door and I think I will re-do the door again soon.
Now I have ordered FAT mat which is 50 SQ FEET in size. Lets see...
I will post pics of my project soon. Thinking about setting up a blog.
For the Door did you do inside and outside panel?
Yes the side fenders for my coupe will definitely require two or three layers.
I am planning to do complete coverage including top and bottom.
Car is stripped down to front seats and been using it for the past two weeks.
you know thats what I have been boggled about. How am i supposed to put a layer on the inside of the door panel..there is barely enough room to get your hands in that area. Or am I thinking something completly wrong??..
Ya definatly setup a blog, i'll suscribe to it
Ya definatly setup a blog, i'll suscribe to it
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
Lol!!! YOu can put your hands inside if you are prepared to cut them pretty badly...
Mine did...
Thats why your parents tell your "Dont put ur hands in places where you shouldnt put ur hand."
Honeslty there are serveral Large holes in the inside panel through which you can touch the exterior panel(Body) Do it as much as you can.
Guess what I just got my FATMAT and today Afternoon I am going to burn in this climate. Damn!
I will take pictures.
Mine did...
Thats why your parents tell your "Dont put ur hands in places where you shouldnt put ur hand."
Honeslty there are serveral Large holes in the inside panel through which you can touch the exterior panel(Body) Do it as much as you can.
Guess what I just got my FATMAT and today Afternoon I am going to burn in this climate. Damn!
I will take pictures.
OK so do you cover up the entire hole?? I did put my hand inside the but there wasnt enough room for me to properly lay it out!!...
In all honesty I never really felt the front of my car vibrating, it was always my trunk and rear side panels. BUT, after putting one layer on the side panels, which sorta stopped the small rattling of the speaker, I felt my car was much more quiet inside the cabin. That I liked more but I could still hear the road...
After 2 layers in the trunk area I still got rattle, it was much less then before but it was there and it annoyed the living shit out of me. Thing is the way you apply it is the key. If you miss one tiny hole/gap/space then all your hardwork and money is done the drain...
In all honesty I never really felt the front of my car vibrating, it was always my trunk and rear side panels. BUT, after putting one layer on the side panels, which sorta stopped the small rattling of the speaker, I felt my car was much more quiet inside the cabin. That I liked more but I could still hear the road...
After 2 layers in the trunk area I still got rattle, it was much less then before but it was there and it annoyed the living shit out of me. Thing is the way you apply it is the key. If you miss one tiny hole/gap/space then all your hardwork and money is done the drain...
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
The Fatmat that I received is Thin, thinner than the Jap Material I have got.
Now I am planning to mix and match.
A lot of sound proofing is trial and Error unlike building an enclosure or selecting the setting on an AMP.
Now I am planning to mix and match.
A lot of sound proofing is trial and Error unlike building an enclosure or selecting the setting on an AMP.
-
- UB Junior Member
- Posts:5
- Joined:02 Jul 2010, 8:56 pm
Ok guys,
Did anyone find an alternate source for car audio sound dampening material.
The Yellowhat at Nad alHamar has some old stock been sitting there for more than 3 years and they want Dynamat prices for this no name crap.
Looking for another retailer / distributor of car audio sound damening material....?
SilicaStorm
Did anyone find an alternate source for car audio sound dampening material.
The Yellowhat at Nad alHamar has some old stock been sitting there for more than 3 years and they want Dynamat prices for this no name crap.
Looking for another retailer / distributor of car audio sound damening material....?
SilicaStorm
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
We are still waiting on our second skin order. We are the authorized second skin distributor for UAE. But we dont have stock.. how silly.
You can also contact Glenn @ skematicx.
Join the car audio movement!!!
You can also contact Glenn @ skematicx.
Join the car audio movement!!!
-
- UB Junior Member
- Posts:5
- Joined:02 Jul 2010, 8:56 pm
Ok, as the Second Skin dealer when is your shipment arriving and what is the unit cost?
- Neo
- Moderator
- Posts:1458
- Joined:03 Jun 2006, 8:58 pm
- Vehicle:2005 Hyundai Coupe
- Location:Abudhabi
- Contact:
Give us few days and you can contact ryan@neoglow.net for details on second skin. Hes the man!!!
We would like to propose you co-operation!
Want to get quality for low price?
AUTOFUN will solve all your problems!
AUTOFUN – is a brand that occupies with production of qualitative car insulation. Our prices and quality will impress you! Just try it and you will get more than you can imagine! Our products are intended to improve safety, purity of sound and driving comfort.
AUTOFUN - car insulation is a multilayer material from butyl polymeric-layer and aluminum foil. The materials are produced in sheets with the size 500(±10) х 750(±10) mm. 10 sheets in one pack!
AUTOFUN assortment is intended for a wide circle of customers and offers you exactly what you need. Our materials can be used everywhere, except food!!!
Samples are available!
https://www.facebook.com/pages/Autofun/ ... ef=tn_tnmn
Want to get quality for low price?
AUTOFUN will solve all your problems!
AUTOFUN – is a brand that occupies with production of qualitative car insulation. Our prices and quality will impress you! Just try it and you will get more than you can imagine! Our products are intended to improve safety, purity of sound and driving comfort.
AUTOFUN - car insulation is a multilayer material from butyl polymeric-layer and aluminum foil. The materials are produced in sheets with the size 500(±10) х 750(±10) mm. 10 sheets in one pack!
AUTOFUN assortment is intended for a wide circle of customers and offers you exactly what you need. Our materials can be used everywhere, except food!!!
Samples are available!
https://www.facebook.com/pages/Autofun/ ... ef=tn_tnmn