Who does a good work of Camber/Tos Settings ?
Moderator:Neo
Hi,
Can I know of any garages in Dubai/Sharjah tht can do good camber adjustments for wider rims, this is a 2006 Civic.
I wont be flushing or slamming the car, I just need good distance between the tyre and the fender, where wide tyres are added. somethingl ike this:
Something like this:
http://25.media.tumblr.com/f8eb2f5a746d ... o1_500.jpg
http://24.media.tumblr.com/4d4cccde1f27 ... o1_500.jpg
http://24.media.tumblr.com/70d313db67a1 ... o1_500.jpg
Again, I wont be flushing/slamming, but lowering, wider rims, and fender rolling will be done.
Thank you
Can I know of any garages in Dubai/Sharjah tht can do good camber adjustments for wider rims, this is a 2006 Civic.
I wont be flushing or slamming the car, I just need good distance between the tyre and the fender, where wide tyres are added. somethingl ike this:
Something like this:
http://25.media.tumblr.com/f8eb2f5a746d ... o1_500.jpg
http://24.media.tumblr.com/4d4cccde1f27 ... o1_500.jpg
http://24.media.tumblr.com/70d313db67a1 ... o1_500.jpg
Again, I wont be flushing/slamming, but lowering, wider rims, and fender rolling will be done.
Thank you
- Alpha
- Adminstrator
- Posts:6255
- Joined:17 Apr 2006, 6:36 pm
- Vehicle:RNN14 + JZZ31 + CT9A
- Location:Dubai
- Contact:
MSW Wheels and NFS Racing are good at suspension tuning.
Motorsport Wheels
tel. 800-WHEELS (943357)
mail. info@msw-me.com
web. www.msw-me.com
NFS Racing
tel. 055-5951778
Motorsport Wheels
tel. 800-WHEELS (943357)
mail. info@msw-me.com
web. www.msw-me.com
NFS Racing
tel. 055-5951778
Anybody willing to light me up, how wide can I go, I'm planning 18x9.5 on the rear, should it be KO, cause I want concavity and all the rims I have seen have only concavity on 9.5, however, 1 set of 8.5 can provide custom offset on 8.5 to get some concavity, people are saying 8" is the max on civics, while all rims provides said that wider rims are possible with camber settings, etc..
And one more thing that is beyond my logical explanation, I finally managed to find the kit to import and it costs around AED2500 but the cost to import it is AED5000, that even more than the cost of the goods, so anybody with experience in this matter will to inform me something. How to get it imported cheaply. The guy said they can export it for $450 via sea, 45 days +/-.
Any one shedding light on both of these cases ?
Thank You
And one more thing that is beyond my logical explanation, I finally managed to find the kit to import and it costs around AED2500 but the cost to import it is AED5000, that even more than the cost of the goods, so anybody with experience in this matter will to inform me something. How to get it imported cheaply. The guy said they can export it for $450 via sea, 45 days +/-.
Any one shedding light on both of these cases ?
Thank You
- Mr.HacKeR
- UB Dedicated Member
- Posts:272
- Joined:15 Aug 2010, 2:24 am
- Vehicle:09 Altima Coupe 3.5SE
- Location:Sharjah
I'm not an expert, but I think it is possibly to fit 9.5" wheels. Why not test fit an 18x9.5 wheel from sharjah!
As for the shipping cost, where are you getting the kit from (Country)? I might be able to help.
As for the shipping cost, where are you getting the kit from (Country)? I might be able to help.
1st : TEST fit a 9.5" wheel with the tire spec that you desire...remember! It is you who will deal with the local authorities and the daily drive...not your bestfriend.
2nd: Always make sure "shipping" is used for things or products which are imposible to get locally...coz then your actually wasting a hell lot of money!
2nd: Always make sure "shipping" is used for things or products which are imposible to get locally...coz then your actually wasting a hell lot of money!
- AccordTuner
- UB Special Member
- Posts:1637
- Joined:17 Aug 2009, 1:25 pm
- Vehicle:Lexus LS460
- Location:Alain / Sharjah
LOL this guy wont do anything to his car just day dreaming and posting in all forums in UAE
about 6 months back he started asking till now nothing done to the car
about 6 months back he started asking till now nothing done to the car
lol don't mean any disrespect to the OP but I agree with Accord..AccordTuner wrote:LOL this guy wont do anything to his car just day dreaming and posting in all forums in UAE
about 6 months back he started asking till now nothing done to the car
Just go out and do something with the car, You will learn from your mistakes.. Can't spend full time in google and wait years to get the "Perfect Dream" mods on your car. At this rate, its Most likely after few years you will just sell your car with no mods since you bought it.
1. Do you have the rims?
if Yes pics pls...
2. finding the tires you want to stretch with needs a lot of test fittings....so Yeah...USED tires for now
3. do you have the camber kits?
4. You also might have to Roll/Shave your fenders...so a repaint and body work is also invloved...
start off with the rims and look for tires
if Yes pics pls...
2. finding the tires you want to stretch with needs a lot of test fittings....so Yeah...USED tires for now
3. do you have the camber kits?
4. You also might have to Roll/Shave your fenders...so a repaint and body work is also invloved...
start off with the rims and look for tires
So unlike other Jax, I don't do shyt until Im in it completely, why make a mistake in the first place if you can avoid it by get close to accurate knowledge, if not complete, but P like uza cant help but start rambling on forums, where your replies are JUST NOT REQUIRED, just cause u know suttin....go jacka on it..AccordTuner wrote:LOL this guy wont do anything to his car just day dreaming and posting in all forums in UAE
about 6 months back he started asking till now nothing done to the car
Last edited by TryllZ on 27 Mar 2013, 8:51 am, edited 1 time in total.
1. Rims: http://www.stancewheels.com/wheels/stan ... slate-greyCaL][CaB wrote:1. Do you have the rims?
if Yes pics pls...
2. finding the tires you want to stretch with needs a lot of test fittings....so Yeah...USED tires for now
3. do you have the camber kits?
4. You also might have to Roll/Shave your fenders...so a repaint and body work is also invloved...
start off with the rims and look for tires
19x8.5 F, 19x9.5 R, 5x114.3
2. Agreed
3.If I'm correct camber will depend on the amount of angle the wheels are, when installed
4. Checked, agreed.
ThankX, as Always..